Will MB Sturgis Propane Hose # 100019-36 Connect 15 lb Propane Bottles to 100 lb RV Tanks

Question

Question:

I have 2 100lb propane cylinders and I am trying to connect them to my travel trailer. It has the standard gas grill style connection for the dual 15lb cylinders. The 100lb tanks just have the small femal adapotor on top with the twist handle to open. This hose seems to be the right size on both ends, but just want to confirm before I order 2 and can’t use them

asked by: Ben

0

Expert Reply:

The two types of fittings you described match what the part # 100019-36 is designed for. It has the male inverted flare that would attach to the regulator on your travel trailer and the POL style that attaches to the 15 lb tanks you have as well.

This would be the correct adapter hose.

expert reply by: Jameson C

0

Answer 1

For your 30,000 BTU wall mounted heater you will need to use a dual-stage propane regulator. The correct regulator will be the MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet #108220. You will need a vertical regulator if…

view full answer...

Answer 2

It sounds like you are needing a hose and regulator to go from your 100 pound cylinder to the house main line. If you have a DOT tank with a Type 1 fitting, you can use a hose like the MB Sturgis Propane Pigtail #100833-15, which can connect to a…

view full answer...

Answer 3

While we do have a hose that will do what you are needing, the Propane Hose with Back Check #37207-30785 would not be the correct option. This is because a 100 lb. propane tank is going to require a POL tank connection instead of a type 1 connection.…

view full answer...

Answer 4

To go from a 100 lb propane tank to a regulator normally requires a hose like the MB Sturgis Propane Pigtail Hose #100019-36 which has a POL fitting for the tank on one side and a male inverted flare on the other. This hose is 3 foot long. For…

view full answer...

Answer 5

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

view full answer...

Answer 6

The regulator you need is MB Sturgis part #108220. The maximum propane flow capacity of this regulator is 400,000 BTU per hour so it can handle the 18,000 BTU of your Empire wall mount ventless heater. The two stage regulator is also the best option…

view full answer...

Answer 7

No, if your auto-changeover regulator already has a built in back check then you won't need to add an additional backcheck valve on your Propane Hose - POL Pigtail x 1/4" Male Inverted Flare - 12' #37207-30685.

view full answer...

Answer 8

When upgrading your propane tanks to a 100 lb. tank the only thing that should need to be changed on a typical propane set up is the supply hose that goes from the propane tank to your regulator. You would need a hose like the MB Sturgis Hose…

view full answer...

Answer 9

In order to connect the MB Sturgis Vertical 2-Stage Propane Regulator part #108220 to a 100 lb propane tank you will need the MB Sturgis Sturgi-Stay Propane Fill Hose part #100019-24 and the MB Sturgis Propane Adapter Fitting part #402258-MBS. In…

view full answer...

Answer 10

I called my contact at Camco and asked about a hose with the correct fittings that will work for you. If the fitting on your 500-gallon tank is the same size as the fitting found on your 20-lb portable tanks, then the hose I recommend for you is part…

view full answer...

Answer 11

Yes, the MB Sturgis Propane Hose w/ Back Check part #100473-30-MBS would replace the leader hoses on your trailer that lead from the propane tanks to the propane regulator. All of the leader hoses have back check valves. If you would like to upgrade…

view full answer...

Answer 12

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...