Review of MB Sturgis Propane - Adapter Fittings - 204120-MBS Video

Searching by part number it appears the MB Sturgis Propane Hose Assembly #100383-48-MBS would be the replacemement part you need for at least the 18CE Cavagna Group replacement. The picture received on our end was a duplicate and you mention…

The JR Products automatic changeover regulator, part #37207-31525, does have a back-check valve so you don't need to purchase the adapters separately with part #204120-MBS. You only need to purchase the adapters if you need a replacement for…

The MB Sturgis High Capacity Two-Stage Auto Changeover Regulator, #888001-MBS, will indicate one tank at a time.

We have what you need. I recommend using the MB Sturgis Sturgi-Stay Propane Hose - POL Pigtail x 1/4" Male Inverted Flare - 12' part #100019-144 one end has the POL tank connection the other is the 1/4" Male inverted flare (standard…

To hook up two 100 pound propane tanks to your trailer, I would recommend the JR Products #37207-30395 Propane Regulator With Automatic Changeover. This part can supply 345,000 BTU of gas. The maximum inlet pressure is 100 PSI. I would just inventory…

The two hoses you mentioned are the same hose, but manufactured by different companies: - MB Sturgis Propane Pigtail - Type 1 x 1/4" Male Inverted Flare #100575-60-MBS - Propane Hose with Back Check - Type 1 x 1/4" Male Inverted Flare…

If your trailer is like most then you will not need another regulator. Take a look at the plumbing currently attached to your 30 pound tanks. You should find a short standard propane hose running from one propane tank to the changeover valve, and…

The MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 36" #100473-36-MBS is a great replacement for the part you referenced but it isn't quite as high a capacity. Nothing in a traditional RV will require the 450K BTU lines and…

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

The MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 15" #100833-15 is an 1/4" inverted flare tip and your regulator requires a standard 1/4" NPT fitting. You just need a pigtail like Propane…

It looks like what you have there are dual propane tanks, so a dual propane regulator will be needed. The age of the trailer doesn't matter so long as the fittings on the tanks are current. So what you need is the Compact Low Pressure 2-Stage…

As far as specs go the Automatic Changeover RV LP Gas Regulator #37207-30395 is what you need to replace your Winntec 6020 regulator. When it comes to the mounting bolt pattern this regulator has a pattern of 1" horizontal x 3-1/4" vertical…