Brake Controller Install Harness Recommendation for 2016 Nissan NV 3500

Question

Question:

Hi, I need an adapter for a 2016 Nissan NV3500 to a Tekonsha P3 controller. I have one that physically fits, but the wire colors and locations do not correspond to the lead from the vehicle. Thank you for any assistance you may provide

asked by: ross

0

Expert Reply:

To install the Prodigy P3 part # 90195 in your 2016 Nissan NV 3500 only requires the correct brake controller install harness. For that you'd want the part # 3050-P as it is a confirmed fit for your vehicle.

The vehicle harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.

expert reply by: Jameson C

0

Answer 1

We have solutions that would work but the Sportrack #SR1020 that you referenced would not fit directly to the tracks you have on your Niagara pop up. Instead the Rhino Rack part #Y02-490B-NT would be a great option that fits directly to the tracks…

view full answer...

Answer 2

Based on the picture you submitted and the info we have on your 2017 Nissan Pathfinder the harness your dealer gave you is correct. It matches the #3050-P which is the correct harness from Tekonsha. Most likely you have found the wrong harness on…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 10

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...