What is the Wire Gauge Size of the Blue Wire on the Optronics Wishbone 5-Way Trailer Harness

Question

Question:

25 ft. Wishbone 5-Way Trailer Harness with 30inch Ground and 5 ft. Blue Wire Item # A25W5B Could you please tell me Gauge of wire ? Thank You in Advance

asked by: Hank M

0

Expert Reply:

The blue wire on the Optronics 25ft Wishbone 5-Way Trailer Harness, # A25W5B, is a 20 gauge wire.

expert reply by: Jared P

0

Answer 1

The problem you are having is a classic ground issue. If the ground wire to the trailer frame or the tail light grounds are not connected securely to clean, rust and paint free surfaces then when the headlights are turned the extra amperage draw for…

view full answer...

Answer 2

I reached out to Optronics and they confirmed that the wire used in the 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style #A35W42B is 100% copper. This harness comes with 2 tail light wires split for simple wiring and has a 3 year warranty.

view full answer...

Answer 3

First, you would want to use 2 of these because otherwise the light would blink with either turn signal. What you you would do is take a trailer side 4-Way, #A35W42B, and attach the lights wires to it as follows: On the driver side you will attach…

view full answer...

Answer 4

There are 6 wires on the 25 Ft 5-Way Trailer Wiring Harness #A25W5B that you referenced because this has a wishboned running light circuit which means it has a wire to run to either side of the trailer's running light circuit. So it still has the…

view full answer...

Answer 5

A great choice for your boat trailer is the LED Trailer Light Kit for Trailers Over 80" Wide #TL16RK. This kit includes 2 tail lights which serve 8 functions (Stop, turn, tail, side marker, rear clearance, side reflector, rear reflector, and…

view full answer...

Answer 6

The best solution for your Ford F-150 is to get two of the Durabilt Hammerlock Coupling Link for 1/2" Chain #DU96MR. This style of link is a little difficult to install but it's very secure and is designed specifically for the size of chain…

view full answer...

Answer 7

What you have is a 5-way with a double wishbone, which means it is likely a double wire for marker lights as well as a double ground. You can replace your 5-way with another wishbone-style but it does not need to be a double wishbone with 7 wires,…

view full answer...

Answer 8

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 9

We do offer a wide variety of replacement lights for trailer but since trailer manufacturers don't keep a record of what they use on trailers I would need some pictures of the lights you are wanting to replace along with some measurements so I…

view full answer...

Answer 10

It sounds like you just simply overfilled the Bearing Buddy Bearing Protectors like part #BB1980A but not to worry, they do this by design so you didn't damage anything. The built-in pressure relief valve will allow grease to seep out the piston…

view full answer...

Answer 11

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...