Replacement Hitch Installation Hardware Kit for Curt Class III Hitch C13068

Question

Question:

What is the Bolt size used for Curt C13068 hitch on a 2014 Honda Odessey?

asked by: Selina

0

Expert Reply:

The Curt 2-inch Class III hitch # C13068 is a confirmed fit for your 2014 Honda Odyssey and this hitch includes the required mounting hardware. The installation instructions, which are linked for your reference, detail the included fasteners and other parts. The 4 main mounting bolts are M12-1.25 x 35mm (grade 5).

We recommend using an exact replacement hardware kit if the hitch is to be re-installed a second time. Hitch hardware is made for one-time use only and cannot be re-torqued for a second install. New hardware kit # RHK will give you a complete exact hardware kit to allow for safe installation. Just enter the hitch part number and brand on the RHK page.

An installation video for this hitch is also included for you.

expert reply by: Adam R

0

Answer 1

Sounds like you broke the weld nut in the trailer frame of your vehicle as you were torquing the hitch bolts down. Normally this doesn't happen but if the torque wrench used is out of calibration it's easier to do. One solution would be to…

view full answer...

Answer 2

Yes, we do offer replacement hardware for the Curt Trailer Hitch Receiver part #C13068 which is a fit for a 1999 - 2017 Honda Odyssey, you'd simply need to order the Replacement Hitch Hardware Kit part #RHK.

view full answer...

Answer 3

I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block #RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are…

view full answer...

Answer 4

It sounds like you are referring to the square hole spacers that are included with trailer hitches like the Draw-Tite Class III #75740 for your 2003 Ford F-150. If this is not what you mean please let me know. The included spacers are required when…

view full answer...

Answer 5

The included spacer plate on the Curt Friction Sway Control for Weight Distribution Systems #17200 is completely optional. If it is needed to achieve proper alignment, the additional holes on the plate offer various mounting locations for the ball.…

view full answer...

Answer 6

We currently only carry the square hole spacer and M12 bolt as part of the Replacement Hardware Kit #RHK. You will need to ensure you put the Curt Trailer Hitch Receiver number 13068 in the appropriate box when placing the order.

view full answer...

Answer 7

We do have trailer hitch hardware for your Curt #C13068 trailer hitch receiver. The Replacement Hardware Kit for Trailer Hitches #RHK is what you need. You will need to enter the hitch item number you listed and then select Curt from the manufacturer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...