Replacement Hitch Hardware for Curt Hitch 13068 On Honda Odyssey

Question

Question:

Does Etrailer sell bolt kit for curt hitch 13068

asked by: Fred B

0

Expert Reply:

Yes, we do offer replacement hardware for the Curt Trailer Hitch Receiver part # C13068 which is a fit for a 1999 - 2017 Honda Odyssey, you'd simply need to order the Replacement Hitch Hardware Kit part # RHK.

expert reply by: Conner L

0

Answer 1

We do have trailer hitch hardware for your Curt #C13068 trailer hitch receiver. The Replacement Hardware Kit for Trailer Hitches #RHK is what you need. You will need to enter the hitch item number you listed and then select Curt from the manufacturer…

view full answer...

Answer 2

The Curt 2-inch Class III hitch #C13068 is a confirmed fit for your 2014 Honda Odyssey and this hitch includes the required mounting hardware. The installation instructions, which are linked for your reference, detail the included fasteners and other…

view full answer...

Answer 3

I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block #RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are…

view full answer...

Answer 4

The trailer hitch I recommend for your 2008 Honda Odyssey is the Draw-Tite Max-Frame #75270 because it doesn't require any fascia trimming (like the etrailer and Curt might). This, as well as the other trailer hitches, exceeds the weight ratings…

view full answer...

Answer 5

The Draw-Tite Class III hitch you referred to, part #75270 uses Class 8.8 M12x35mm bolts with a 1.25 thread pitch. The bolts would fasten to the weld nuts that are welded to the inside of the frame members. When you install the hitch, take some time…

view full answer...

Answer 6

The bolts that are used are Class 5 if they are Silver and Class 8 is they are a Gold color. If you are looking for replacement hardware for your Curt #14001 Trailer Hitch, you can use the Replacement Hardware Kit, part #RHK. All you need to do is…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Replacement Hitch Hardware for Curt Hitch 13068 On Honda Odyssey

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching