5 Lug Hub Recommendation for 2,000 lb Capacity Dexter Torflex Axle
Question:
I have a Jayco pop-up camper with a Dexter Torflex #9 2000-lb axle. Current hubs are 4 on 4-inch. I have lifted the trailer in anticipation of larger wheels/tires. Seeking help identifying the correct hubs to replace the current 4-on-4 with a 5-on-4 1/2 configuration to facilitate the larger wheels/tires. Can you confirm if this is the correct kit? If not, what do I need and/or how to determine this from current hardware?
asked by: Adam
Expert Reply:
Since you have a Dexter 2,000 lb trailer axle the correct hub you would need is the part # 8-258-5UC1-EZ this will fit your spindle and it has a 5 on 4-1/2 inch bolt pattern like you need as well.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: spring hanger
- Q&A: Recommended Lug Nut Torque For Dexter Trailer Hub and Drum Assembly # 8-257-5UC3
- Q&A: Correct Lug Nut Torque for 12-Inch Steel Trailer Wheel
- Q&A: Lug Nut Torque Rating for a 5-Lug Trailer Wheel
- Article: Where to Position the Trailer Axle?
- Shop: Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Shop: Suspension Enhancement
- Article: Double-Eye Trailer Suspension System Review
- Shop: Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Shop: Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: Angle Of Shackles On Trailer Appear Wrong When Installing Leaf Springs
- Q&A: How to Determine the Correct Axle Position When Building a Trailer
- Q&A: Trailer Hub Recommendation with 5 on 4-1/2 inch Bolt Pattern that Replaces Bearings L44649
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Video: Redline Trailer Spindles RG05-100 Review
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Fifth Wheel Hitch
- Video: Choosing the Right Brake Controller
on Trailer Hubs and Drums
