Spare Wheel and Tire Recommendation for Tire Size 5.30-12

Question

Question:

Hi i am looking for a spare tire for my 2004 fleetwood yuma camper. It is a 5.30-12 rim 4.25,. Thanks!

asked by: Jen

0

Expert Reply:

We have tires in that size mounted to wheels. If you need a 4 on 4 inch bolt pattern you would want the part # AM30780 or if you have a 5 on 4-1/2 inch bolt pattern you would want the # AM30820.

expert reply by: Jameson C

0

Greg Z.

5/27/2020

I also need a 5.30-12 with 4 bolts. But I'm wondering what the RIM:4.25 means that is also on the tire?

Reply

Chris R.

5/31/2020

I linked our selection of 5.30-12 size tire/rim combos with a 4 bolt pattern below - all of which feature a 4 on 4" bolt pattern. I'm not quite sure what the RIM 4.25 designation you found on the tire is referring to. If it's on the tire itself it wouldn't have anything to do with the bolt pattern since that doesn't matter with regards to a tire/wheel fitment (bolt pattern only comes into place when mounting the wheel to your hubs).

Helpful Links

dept-pg-trailer_tires_and_wheels-sz-4_on_4_inch-gw-5.30~12.aspx

Reply

Answer 1

As long as you have the clearance needed to fit a tire that's slightly taller and wider than what you currently have a 5.30-12 would work well. Your current tire size is 20.5 inches in diameter and the 5.30-12 is 21.9 inches in diameter. So this…

view full answer...

Answer 2

The Kenda Wheel and Tire part #AM30620 and the Taskmaster part #TA89RR you referenced are very similar in a lot of ways. White wheel, 4 on 4 inch bolt pattern, Load Range of C, but the big difference is the speed rating. The Taskmaster is rated for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 6

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 11

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...