Will 2 Rightline Gear Foam-Block Kayak Carriers Fit on the roof of a 2017 Toyota Camry

Question

Question:

Would 2 of these RL100K10 fit on my roof to carry 2 kayaks? 2017 Toyota Camry SE. Thanks

asked by: LaDonna M

0

Expert Reply:

That depends on the width of your kayaks. The Rightline Gear Foam-Block Kayak Carrier # RL100K10 is 14-3/4 inches long. But the kayaks are larger than the blocks and will be the deciding factory.

If there's enough space on the roof of your vehicle to hold two kayaks side by side then the blocks will fit as well.

expert reply by: Charles S

0

Answer 1

Since the Malone Deluxe Kayak Carrier with Tie-Downs - Foam Block Style - 18" Long #MPG152 already comes with 2 bow/stern tie-downs anchor kayak to your vehicle, you will not need to purchase any additional tie-downs for your kayak. The…

view full answer...

Answer 2

For the most flexibility in placement of two kayaks on the roof of your 2011 Subaru Outback Wagon you could use a foam block type kayak carrier such as Malone #MPG152 directly on the roof itself, bypassing the front crossbar. The front block could be…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Answer 11

You'll need an adapter, but yes, the etrailer J-Style Kayak Carrier #e98878 is compatible with the Telos XL Load Assist #MPG351XL. What you will need to add is the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR. The…

view full answer...

Answer 12

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

view full answer...