Summer Starts Here - Save up to 70%
Yeti home integration kit allows you to connect your Yeti portable power station to your home or RV to provide clean energy when you really need it.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Goal Zero Home Integration Kit. Now, this Yeti Home Integration Kit allows you to connect your Yeti portable power station to your home or your RV to provide clean energy when you really need it. Now it does require the installation by a qualified licensed electrician with a thorough knowledge of all applicable electrical and building codes. This will include everything laid out here on the table. It includes this Reliance Pro Tran two series 15 amp four circuit 120 volt manual home integration transfer switch panel. It includes this 10' long 14 gauge Yeti extension cable.
Basically it allow you to plug into your Yeti power station and then this end will plug right in down here. Now it does also include this 16" long section of conduit and then three different metal connectors with their hardware to install them.It does require a Goal Zero portable power station, either a Yeti 1000 and above, and this can power up to four circuits from your breaker panel. Basically you can see the four switches right here, 15 amps each one 120 volts. And up here are the switches that allow you to switch it, like if your power goes off. Right now they're in the off position.
When it's running normal through your circuit breaker panel, it'll be in the line position. If they end up losing power you can just switch it over all the way to the top to generator and then it'll it to run off the Yeti generator.Now this is UL approved. Voltage again is 120 single-phase, frequency 60 hertz, rated watts is 1,875 watts, rated amps 15 amps at 120 volts single-phase, maximum generator input is 15 amps, maximum volt wattage 1,875 watts and the circuit breaker protection we had mentioned is 12 volts up to 15 amps 120 watt maximum. Few measurements on this, weight of it is about 9 1/2 pounds. Size of it width-wise, is going to be right at 7-3/4" wide.
The height on it, from the very bottom to the top is right at 11-1/4" tall, and the depth at the widest part, which is probably going to be right here up at the top, is going to be right at 4-1/2" deep. But that should do it for the review on the Gold Zero Home Integration Kit.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Yeti home integration kit allows you to connect your Yeti portable power station to your home or RV to provide clean energy when you really need it.
Love the home integration manual transfer switch for our goal zero. It works seamlessly and performed as expected during power outages due to CA wildfires summer 2022. etrailer very easy to work with also; the goal zero home integration kit was out of stock, and etrailer suggested a different one, but I went ahead and waited for the goal zero home integration kit to arrive. I like the fact that etrailer and Noah were proactive. At etrailer customers really do come first!
The folks at etrailer were great they kept me in the loop on the backorder status & made me aware when the order had shipped.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.