ARC Lighting Load Resistor for LED Lights - Quick Splice - Qty 1

Video Transcript for Review of ARC Lighting Load Resistor For LED Light - ARC22VR

Hi everybody, Andy here with etrailer.com and today we're gonna take a brief look at this ARC lighting load resistor for LED lights. Guard against LED-related turn signal problems with this load resistor kit. This simple effective system builds resistance that corrects flash timing, thereby preventing the hyperflash phenomenon that occurs with LED indicators. As you can see, it features a compact design for tight applications, and pulling out my ruler here, let me just give you some overall measurements. The length, we are sitting right at 3 1/2 inches long, and about an inch and a half wide. And then the thickness, we're sitting right at half an inch.

And I measured this wire length earlier and we're sitting right at 13 inches long for both of those wires. So this is going to install quickly and easily and it's going to work with most import and domestic vehicles. It is constructed of a black anodized aluminum and the load is going to be six Ohms. And this has the capacity of 25 Watts. The current draw, 1.9 amps at 12 volts and 2.25 amps at 14.4 volts.

And it includes everything that you see on the table here before me. It includes the resistor, two quick-splices and a piece of 3M double-coated tissue tape. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me..