Which Torklift Tie Downs are a Fit for the 2001 Ford F-250 with Long Bed and Aftermarket Hitch

Question

Question:

Hello, I have a 2001 F250 Superduty Crew Cab, Diesel, Long Bed. I took the side-steps off and I never plan to put new ones on. I have Curt 15810 C15810 after market hitch receiver in the rear. Are those the correct tie downs? Thanks,

asked by: John P

0

Expert Reply:

Yes, for your 2001 Ford F-250 crew cab, long bed, diesel, with removed side steps, and an aftermarket hitch the correct tie downs are the part # TLF2011 and # TLR3500 that you referenced.

expert reply by: Jameson C

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

Yes, the Draw-Tite Trailer Hitch Receiver #DT45508 will fit on you 2001 Ford F-350 XL Super Duty. This will allow you to use either the 34" #RP45292 or 41" #RP45018 extension in the 2-1/2" Receiver. Do remember you will need a Wiring…

view full answer...

Answer 3

Officially, Curt combo bar #C49480 doesn't have a capacity. Curt uses this bar when they build hitches rated up to 17,000 pounds. However, it depends on how it is integrated into the rest of the hitch, what it is going on, and how it and the…

view full answer...

Answer 4

The truck camper tie-downs offered for your 2000 Ford F-250 can be seen on the linked page. All options are from TorkLift and the correct one for you depends on your bed length and the presence of other equipment such as steps or a hitch. At the top…

view full answer...

Answer 5

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 6

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 7

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 8

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 9

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you will…

view full answer...

Which Torklift Tie Downs are a Fit for the 2001 Ford F-250 with Long Bed and Aftermarket Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching