Can Curt Combo Bar with 2" Trailer Hitch Receiver be Cut to Length and Welded On

Question

Question:

I need to weld a new bar and hitch receiver onto already existing brackets. Is there any reason why I cant cut this to the appropriate length, and then weld the remaining part onto the bar to make the receiver? It seems the bar and receiver are the same material/width/etc. Thanks!

asked by: Nick

1

Helpful Expert Reply:

Curt Combo Bar with 2" Trailer Hitch Receiver - 36" Long - Unpainted # C49360 was meant to be used in the fabrication of a trailer hitch. It is ready to be trimmed, welded, and painted so you will be good to go!

expert reply by: Michael H

1

Answer 1

The Brophy Hitch Extender with Step #ST18 that you referenced really just moves the location of your receiver back 18". You install your Weight Distribution (WD) system the same exact way, it will just sit further back from your vehicle. This…

view full answer...

Answer 2

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

view full answer...

Answer 3

I spoke with my contact at Reese and as long as you are using the Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, item # RP45292, at the 24 inch extension length, there are no stabilization chains or cables required. Since your trailer is…

view full answer...

Answer 4

The longest extension available that will work with the factory trailer hitch receiver on your 2019 Chevrolet Silverado 1500 is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long #HE18. You will need to measure from the center…

view full answer...

Answer 5

Sounds like you are looking for the part #C49360. This is a 2 inch hitch accessory tube that measures 36 inches long and has the standard 5/8 inch pin hole. I attached a review video for this product for you to check out as well.

view full answer...

Answer 6

There is a TorkLift SuperHitch that fits your 2012 Ram 3500 with a factory hitch that is welded on, though it is a different part number than the one you mentioned. There are two options for a TorkLift SuperHitch for your truck, one with a 2 inch…

view full answer...

Answer 7

The longest standard hitch extender we have available for 2 inch receivers is the Brophy #ST18. This particular extender measures right at 18 inches from the center of the hitch pin hole on your trailer hitch to the center of the hitch pin hole on…

view full answer...

Answer 8

Depending on how the angle of the ramp changes a super long extension may not be a great idea as it would either point the nose of the trailer up super high or down to low. The longest extension we have for a 2 inch hitch is 18 inches and it would be…

view full answer...

Answer 9

The TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" #TLD1111-30 is a confirmed fit for your 2019 RAM 3500 longbed. It does not require any drilling or raising of the bed but you will be removing the…

view full answer...

Answer 10

Thanks for the picture! To use the TorkLift SuperTruss Hitch Extension 48" Long item #TLE1548 with your 2022 Ram 3500 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item #TLD1111-30. This hitch is custom fit and…

view full answer...

Answer 11

The install of the weight distribution system you mentioned will add a bit more clearance between the trailer hitch and trailer so you'd gain a bit of clearance there. The best setup for a hitch extension type solution would be the replacement…

view full answer...

Answer 12

A body lift does not affect towing since it's only the body of your vehicle that's being raised; the stock suspension and wheels remain at their original height. With that being said, from what I was able to research online, your 6 inch Pro…

view full answer...

Can Curt Combo Bar with 2" Trailer Hitch Receiver be Cut to Length and Welded On

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching