Compatibility of the Voyager Rear Camera and LCD Monitor on a 1999 Chinook RV

Question

Question:

I have an Audiovox LCM-445 LCD 4inch monitor in my 1999 Chinook RV...with a non-functioning I think AOC-75 b/w camera. Will the VCMS20 color camera work with this monitor? I have the 4 pin connector to the existing camera.

asked by: Roxanne

0

Expert Reply:

The connection on the Voyager Rear Camera with LED Low Light Assist, # VCMS20, uses the standard 4 pin audio/video connection. If your monitor uses this type of audio/video connection, then the two cables will connect.

The only issue I might see is that with the age of your monitor you may not be able to utilize all the features of the new camera. However, standard operation of the system will function well.

If you are looking for a complete upgrade, I recommend the Rear View Safety Backup Camera System, # RVS-770613-NM. This system will include a 7 inch digital color LCD monitor and features a camera that is equipped with a 50 foot view in infrared night vision that makes backing up at night a lot easier.

expert reply by: Jared P

0

Israel B.

6/21/2020

I have an 2001. Chinook concourse. My back up camera.. no longer works. Can I replace the camera with a newer model and can I used the same wiring harness. My screen is installed in my driver side visor?

Reply

Chris R.

6/24/2020

Most camera systems use their own harness, so it's hard to say without knowing what particular model camera setup your Chinook is equipped with. Is there any brand or model info printed on the existing camera?

Reply

Israel B.

6/24/2020

@ChrisR where can I find the four pin connect ? the camera is a voyager back up, serial # is. 106C0001. Model is very hard to read due to wear and Tate. All I can copy is the following, model one of the two numbers are as follows , AOG or AGC-10.manufacturer in Pueblo Colorado. It has a four pin connector and one long black wire with a slide connector. Thanks for the help.

Reply

Israel B.

6/25/2020

@ChrisR the camera is a voyager back up, serial # is. 106C0001. Model is very hard to read due to wear and Tate. All I can copy is the following, model one of the two numbers are as follows , AOG or AGC-10.manufacturer in Pueblo Colorado. It has a four pin connector and one long black wire with a slide connector. Thanks for the help.

Reply

See All (5) Replies to Israel B. ∨

Answer 1

Yes. The Rear View Safety Backup Camera System #RVS-770613-NM is designed to work as a universal application camera system, so it will work on just about anything with wheels. This system comes with a really nice 7" color monitor that will make…

view full answer...

Answer 2

I have an easy way for you to determine which wire has power but we can't tell by just the wire colors. Most likely though the white wire is the ground since that the industry standard for the ground circuit and the green is the activation…

view full answer...

Answer 3

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 4

I have a complete replacement camera system option for you, but since your current camera system is no longer made there are no replacement cameras available that use your same monitor. I recommend replacing it with the Voyager WiSight 2.0 Wireless…

view full answer...

Answer 5

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 6

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 11

Yes, the Adco Olefin HD travel trailer cover part #AD97ZR does for sure fit your 2015 Jayco X20E. We have confirmed this with Adco.

view full answer...

Answer 12

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...