Voyager WiSight Wireless Backup Camera System Installation - 2018 Coachmen Apex Travel Trailer Video

Hey Rosemary; I'm happy to verify for you it is compatible. The #FRCBRKT-BL is actually the bracket for the camera but is the Vision S system. But the camera that mounts to that bracket will absolutely work with the Replacement 5"…

The Voyager WiSight Wireless RV Backup Camera System #ASA37YR you were looking at is only compatible with the RV Backup Camera #ASA74YRor #WVH100 so this would need to be the camera you already have installed or you would need to replace the…

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung couplers aren't as…

There isn't an adapter to connect the wiring of a Furrion camera to a Voyager. With that said you can pretty easily just cut the connectors off and then connect to the camera since it's only two wires.

I have a solution for you but none of the current monitors are compatible with the wiring of your Voyager AOM 681 monitor. I recommend the Furrion Vision S Wireless RV Backup Camera System with Night Vision item #FOS43TASF. This is a wireless backup…

The steps for pairing your Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR camera and monitor are as follows: 1. Make sure the monitor is connected to 12 Volt DC power supply, but 12 Volt DC power is removed from the camera (clearance…

We do have what you need, but since your 2022 Winnebago 2529RG is prewired for the Voyager system you will not want to use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR that you were looking at. Because you will…

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, #TLA7834 is for an entry height of 31" - 42". Find the mounting spot for the bracket on your vehicle and measure from that point. The #TLA7835 part number is for height of…

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have a…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

We had a 2019 Nissan Armada in our shop and were able to confirm the Plug-and-Play Wiring Harness #RED39FR will work. You can always check to verify you have the correct connector on your Armada. I have linked an installation video below for the…