Does all of The Rhino Rack Measuring Strip # RRM641 Need to Be Installed in Crossbar

Question

Question:

I cut the Rhino Rack Measuring Strip part # RRM641 wrong, and although Ive fixed the problem to make the bars fit my car, Im wondering if I need to put the remains of the measuring strip back in he channel? If I dont, will it make a lot of wind noise? Thanks!

asked by: Suzie D

0

Expert Reply:

I'd put the trimmed off portion of the # RRM641 back in the slot of the crossbar. Otherwise you'd most likely get a pretty loud whistle or howl on the highway. You can try without it but you are going to have a quieter ride with it installed.

expert reply by: Jameson C

0

Answer 1

The correct Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs for a 2021 Ram 1500 is part #RR56QJ which is only offered in a four pack.

view full answer...

Answer 2

We don't have video footage of this, but we'd be happy to describe the process. According to Rhino-Rack the best way to do this is with the #RRVA126B-2 crossbars off the vehicle. I'd recommend proceeding with the installation…

view full answer...

Answer 3

The Rhino-Rack Vortex crossbars that are designed to fit your 2019 Ford Edge are the 54" Crossbars #RRVA137B-2 (along with the 2500 Series Legs #RRRLKVA and Fit Kit #DK432). For the 54" bars your strip length measurement is 150mm.…

view full answer...

Answer 4

The roof rack consisting of the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" #RRVA150B-2, the 2500 Series Legs #RRRLKVA and Fit Kit #DK043 will fit your 2018 Ram 2500 Crew Cab with sunroof. You will be able to use the tilt function…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 9

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 10

To determine which brake assemblies would be needed, you will need to measure your existing brake drums as shown in the provided photo. Since your trailer has a 14,000 lb capacity, you most likely have tandem 7,000 lb axles, which typically use a…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...