Will Reese 5th Wheel Trailer Hitch Cover Fit a 16K 5th Wheel Slider Trailer Hitch

Question

Question:

Does the Reese RP30055 cover work for a Reese 16K slider hitch, also? I am looking for a cover for mine and know a few others curious, also.

asked by: TIM

0

Expert Reply:

The Reese 5th Wheel Trailer Hitch Cover, # RP30055, will fit a 15k hitch and a 20k hitch, so there should not be any fit issue with a 16k hitch. To verify, you can take some measurements and compare them to the cover which measures 18 inches long and 28 inches across. The cover is designed to cover the hitch head and not necessarily the base or legs. Take a look at the third and fourth pictures on the product page.

expert reply by: Michael H

0

Answer 1

We do have a cover for your 5th wheel assembly. The Classic Accessories Cover for 5th Wheel Trailer Hitch - 24" x 24" x 18" - Black, part #CA80116, is made from heavy duty vinyl ,so it is easy to wipe down. It resists UV rays, which…

view full answer...

Answer 2

The Reese 5th Wheel Trailer Hitch Cover #RP30055 should have no problem fitting the head of your Curt 20K Fifth Wheel Hitch. The only fifth wheel hitches this cover doesn't fit are the ones that have larger heads like the Elite hitches. The Curt…

view full answer...

Answer 3

The Classic Accessories Cover for 5th Wheel Trailer Hitch #CA80116 will work to cover your Curt 16k sliding 5th wheel hitch. I have included a couple pictures of this cover being used on other sliding 5th wheel hitches. While the cover does not quite…

view full answer...

Answer 4

I pulled a Classic Accessories Cover, part #CA80116 from our warehouse and installed it over a Q20 hitch. I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made of heavy-duty waterproof Black…

view full answer...

Answer 5

The Curt A16 #C16521 requires lubrication of the skid plate, center pivot point, locking pawl, jaw pivot points, and linkage pivot points. I have attached the complete maintenance schedule below for your reference.

view full answer...

Answer 6

I am sorry to hear about the issue you are having with your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC358590. The first thing you are going to want to do is check for blown fuses on the control board. If the fuses are…

view full answer...

Answer 7

We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.

view full answer...

Answer 8

The Lippert Ground Control leveling system #LC358590 will work well for you. The 4-points of stability and leveling are going to provide a more stable feeling when you are in the trailer without the additional expense of a 6-point system. As long as…

view full answer...

Answer 9

It sounds like you just need to reset the zero point. In order to do this you will need to follow the steps I have attached for you below and in the photo. If this does not fix your issue then please just let me know and I will see if we have any…

view full answer...

Answer 10

Hi Phillip, The Furrion Arctic RV Refrigerator w/ Freezer #FR42PJ is going to come with a red, white, and green wire. The red wire is your positive, white is your negative, and green is your ground. Both the white and red can be ran to the DC…

view full answer...

Answer 11

The Furrion refrigerator part #FR42PJ can draw up to 11 amps per hour which if that was the only thing drawing power the setup on the Montana would easily work great. Especially since you have lithium batteries. I also attached a link to a page that…

view full answer...