Will Classic Accessories Cover Fit Curt Q20 Fifth Wheel Hitch

Question

Question:

will this cover fit the curt q 20 fifth wheel hitch???

asked by: Robert

1

Helpful Expert Reply:

I pulled a Classic Accessories Cover, part # CA80116 from our warehouse and installed it over a Q20 hitch.

I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made of heavy-duty waterproof Black vinyl and measures 24 x 24 x 18 inches. It also features elastic cords with hooks that secure the cover to your fifth wheel rails.

expert reply by: Jeffrey L

1

click to enlarge

Answer 1

We pulled a Classic Accessories Cover, part #CA80116 from our warehouse and installed it over a Q20 hitch which is the same size as a Q24. I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 6

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 7

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 8

The Head Unit and R16 Roller Adapter #C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part #C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact which…

view full answer...

Answer 9

The difference between a slide bar jaw and a dual jaw is how tightly the fifth wheel king pin is held. Both do a good job securing the king pin, preventing it from coming loose. The Dual Jaw will hold the king pin much more tightly, preventing the…

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Will Classic Accessories Cover Fit Curt Q20 Fifth Wheel Hitch

Product Page this Question was Asked From

Continue Researching