Which Trailer Hitch Would Fit 2012 Chevy Express Shuttle Bus on Cutaway Chassis

Question

Question:

I own a 2012 express shuttle bus. I am trying to mount trailer hitch. Some say it might fit. but cannot find and spec measurements of actual hitch. Bolt to bolt measurements. do not want to order then find out it doesnt fit # C15320

asked by: John

0

Expert Reply:

Your 2012 Express Shuttle Bus would be built on the cutaway chassis version of the 2012 Express Van so that means the correct hitch you'd need is the Buyers Products part # 3371801102 which was made for this style of chassis.

I attached a picture that has dimensions of this hitch for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Curt #C15320 will fit the frame of your 2014 Chevy Express Cutaway Van Chassis, but in order for the hitch to clear the bumper, the distance between the underside of the frame member that the hitch bolts to and the lowest point of the rear bumper…

view full answer...

Answer 2

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis #3371801102 you were looking at measure 39" from center to center of the mounting holes as you can see in the included diagram, so depending where you measured…

view full answer...

Answer 3

I went to our warehouse and took a couple of measurements of the part #C15800. I have attached a photo of the trailer hitch and it has the dimensions noted. It measures 7 inches from the mounting lip to the top of the receiver opening and 9-1/2…

view full answer...

Answer 4

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

view full answer...

Answer 5

I went and grabbed both hitches that you referenced to get the dimensions you asked about. If you check out all the attached pictures you will see the dimensions you are looking for the Curt #C14006 and #C15323.

view full answer...

Answer 6

The best trailer hitch receiver we have for your 2007 Chevrolet Express Van Cutaway is the Buyers Products 2" Hitch Receiver part #3371801102. This is the only option we have that is made specifically for the cutaway model. It has a 1,200 lb…

view full answer...

Answer 7

I went out to our warehouse and measured the Buyer's Products hitch, part #3371801102, and it's 6-1/2 inches from the top of the mounting surface to the top of the reciver tube. Then it's about 9-1/2 inches to the bottom of the receiver…

view full answer...

Answer 8

On the Buyers Products hitch, part #3371801102, the mounting holes are 38-3/8 inches across center on center. Then on each side starting with the hole that's towards the rear of the vehicle they measure 3-11/16 inches from the first to the center…

view full answer...

Answer 9

I would be happy to help you with dimensions to the Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis item #3371801102 you were looking at. The measurement you are asking about is 9-1/2". This is from the top of…

view full answer...

Answer 10

Buyer's Products does indeed recommend the #3371801102 for your cutaway van chassis, but to determine if the hitch will work, you'll need to measure for the drop needed. You do this by measuring downward from the underside of the frame member…

view full answer...

Answer 11

From where the mounting brackets on the Buyers Products 2" Hitch Receiver #3371801102 will meet up to the frame of your GMC van down to the top of the receiver opening measures 7" (see attached).

view full answer...

Answer 12

The Buyer's Products Class IV hitch you had looked at, part #3371801102 would be the correct fit for your 2005 GMC Savana Van Cutaway Chassis, but in order to make sure it'll be compatible with your Royal utility body, you'll need to make…

view full answer...

Which Trailer Hitch Would Fit 2012 Chevy Express Shuttle Bus on Cutaway Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching