Recommended Replacement Landing Gear For 2006 Keystone Montana 5th Wheel Trailer

Question

Question:

I have a 2006 Montana 5th wheel trailer Model 3475RL. Could you please tell me what the correct replacement would be for this unit. Thank you

asked by: Larry L

0

Expert Reply:

Lippert made specific replacement landing gear for your 2006 Keystone Montana 5th Wheel.

Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652.

expert reply by: Jason S

0

Answer 1

Without knowing the actual hitch you are using, I can only give you general info. Sometimes with this issue it is because you are taking too much weight off the hitch. The hitch needs a certain amount of weight on it to function correctly and release…

view full answer...

Answer 2

I did some checking and the Fulton line of landing gear was discontinued in 2000 and there are no longer any replacement parts listed for it. Since you need 2 motors anyway, now would be a great time to replace the landing gear. For a system that…

view full answer...

Answer 3

It definitely sounds like the internal gears on your existing landing gear system are shot so a complete replacement is your best option. I'm not able to track down what specific model system would have been installed at the factory on your 2004…

view full answer...

Answer 4

Any powered landing gear or powered tongue jack will draw less power as it legs descend down toward the ground and much more as soon as they make contact and encounter resistance. This is a normal occurrence. In the same way, any jack - even a manual…

view full answer...

Answer 5

It sounds like you need a gearbox rebuild kit or a new gearbox for the landing gear on your 2006 Keystone Montana. The motor itself will not have a clutch mechanism. If the motor turns then chances are that the issue is downstream, in the gearbox or…

view full answer...

Answer 6

Yes, in case of a power failure, the levelers of the Ultra-Fab Landing Gear Set #UF17-943010 can be operated manually by removing the four screws that hold the motor/gear assembly. The slotted shaft can then be turned with a large flathead…

view full answer...

Answer 7

I believe the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear #LG-179015 is what you are looking for. This is a replacement for several different manufacturers. Be sure to compare this with the one that you have on your 2006 Keystone…

view full answer...

Answer 8

Your 2008 Weekend Warrior 5th wheel trailer is pretty heavy. In my research I found the weight of the trailer is arouns 10,000 to 11,000-lbs so I recommend going with a system that can handle the weight. I recommend the Ultra-Fab Deluxe Electric…

view full answer...

Answer 9

Installation of the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 requires three steps for installation: 1) welding on the jack hanger brackets to the front of the trailer frame under the overhang, 2) bolting the jacks assemblies to the…

view full answer...

Answer 10

In order to pick out a direct replacement for the landing gear on your Challenger RV we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then…

view full answer...

Answer 11

The Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 referenced in your question is a great landing gear system that features dual electric jacks that will raise and lower at just the flip of a switch. The jacks themselves can operate…

view full answer...

Answer 12

Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 comes already greased and ready to install. There are grease fittings on each leg so if you need to add grease in the future it is easy to do so!

view full answer...

Recommended Replacement Landing Gear For 2006 Keystone Montana 5th Wheel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching