Does Ultra-Fab Deluxe Electric Landing Gear Set Come Already Greased

Question

Question:

just wondering if we needed to grease the landing gear after installation. Comments stated they were shipped dry.. Our installer stated differently.

asked by: Ronald

0

Expert Reply:

Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 comes already greased and ready to install. There are grease fittings on each leg so if you need to add grease in the future it is easy to do so!

expert reply by: Michael H

0

Answer 1

Thanks for all that good info, and what you have is the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010, which you can replace with a Lippert set with a high speed motor on you RV, though you will need to have new brackets welded on. The…

view full answer...

Answer 2

The Ultra-Fab Deluxe Electric Landing Gear #UF17-943010 does come with the grease installed. Per the instructions you should grease the system annually with Moly Bentone Grade 3 Grease. As the instructions say, two pumps from a grease gun is all that…

view full answer...

Answer 3

By over greasing the Ultra-Fab Deluxe Electric Landing Gear #UF17-943010 it would push grease into the motor which would cause it to fail. The motor gear box should only receive 2 pumps of grease annually for maintenance. If you over grease the upper…

view full answer...

Answer 4

Lippert made specific replacement landing gear for your 2006 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.

view full answer...

Answer 5

If you have both weld stops on the same side of the brackets on the RV they wouldn't be able to jack up the trailer and then also not fall once they've retracted. There is quite a bit of force on the jack when they are lifting a trailer up,…

view full answer...

Answer 6

If you are looking to replace your existing landing gear, the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 referenced in your question should work great on your 2009 Keystone Trailer. As you referenced in your question, this pair of…

view full answer...

Answer 7

Ultra Fab uses a unique mounting bracket dimension that does not match the Lippert or Reese systems surprisingly. You could still uses the part #UF17-943010 but you'd have to have the brackets on your trailer moved to match the landing gear.…

view full answer...

Answer 8

Base on the installation instructions, to grease the jackscrew on the Ultra-Fab Electric A-Frame Jack, #UF38-944017, extend the jack until the grease fitting is aligned with the hole in the outer tube. You can apply enough grease with two pumps from…

view full answer...

Answer 9

Your 2008 Weekend Warrior 5th wheel trailer is pretty heavy. In my research I found the weight of the trailer is arouns 10,000 to 11,000-lbs so I recommend going with a system that can handle the weight. I recommend the Ultra-Fab Deluxe Electric…

view full answer...

Answer 10

Installation of the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 requires three steps for installation: 1) welding on the jack hanger brackets to the front of the trailer frame under the overhang, 2) bolting the jacks assemblies to the…

view full answer...

Answer 11

I did some checking and the Fulton line of landing gear was discontinued in 2000 and there are no longer any replacement parts listed for it. Since you need 2 motors anyway, now would be a great time to replace the landing gear. For a system that…

view full answer...

Answer 12

In order to pick out a direct replacement for the landing gear on your Challenger RV we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then…

view full answer...

Does Ultra-Fab Deluxe Electric Landing Gear Set Come Already Greased

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching