Recommended Weight Distribution System on 2006 Toyota Sequoia
Question:
I have a 2006 Sequoia that I will be using to tow my r-pod which weighs 2300lbs as stated on the title. My vehicle manual says to use an anti sway device when towing over 2000lbs. I need to decide on either an anti sway device or wdh. Can you help? Thanks.
asked by: Rebecca D
Expert Reply:
A weight distribution system is recommended anytime your trailer weight is more than 50 percent of your tow vehicle's weight. With a 2300 lb. trailer, and your 2006 Toyota Sequoia, you're under that but not by much. Especially, if you have anything in the R-pod.
With that being the case, I recommend a weight distribution system with sway control. To determine the correct system, we need to determine your total tongue weight, which is the tongue weight of the loaded and ready to tow trailer added to the amount of weight in your Sequoia behind the rear axle. The tongue weight of your trailer is approximately 10-15 percent of its loaded weight. With a 2300 lb. trailer and the weight of cargp behind the rear axle of your SUV it's not likely you'll be over 500 lbs. tongue weight. If you'd like to be more exact on measuring this you can take your trailer to a scale and have it weighed. Or you can use a tongue weight scale like the etrailer # e99044.
The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-0600 is an appropriate system for you. It's rated for 600 lbs. of tongue weight and has built in sway control to help keep your trailer in line.
You will also need a hitch ball go with the Fastway e2. For a 2 inch diameter ball use # A-90 and for a 2-5/16 inch ball use # 19286.
I've attached some help articles on weight distribution and tongue weight for you.
![Charles S](https://images.etrailer.com/static/images/catg/people/1012_tn.jpg)
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
![how-to-determine-trailer-tongue-weight](https://images.etrailer.com/static/images/catg/faq/how_to_determine_trailer_tongue_weight_150.jpg)
![weightdistribution](https://images.etrailer.com/static/images/catg/faq/weightdistribution_150.jpg)
![Curt Hitch Ball - Trailer Hitch Ball - A-90 Review](https://images.etrailer.com/static/images/faq/Demo-Curt-Balls-A-90_150.jpg)
![Review of etrailer Tools - Hitch Tools - Measuring Devices - e99044](https://images.etrailer.com/static/images/faq/Demo-etrailer-Tools-Hitch-Tools-Measuring-Devices-e99044_150.jpg)
![Fastway Weight Distribution - WD With Sway Control - FA94-00-0600 Review](https://images.etrailer.com/static/images/faq/Demo-Fastway-Weight-Distribution-FA94-00-0600_150.jpg)
![Draw-Tite Hitch Ball - Trailer Hitch Ball - 19286 Review](https://images.etrailer.com/static/images/faq/Demo-Tow-Ready-Balls-19286_150.jpg)
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Reese Pro Round Bar Weight Distribution w/ Sway Control - 8,000 lbs GTW, 800 lbs TW
- Shop: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Search Results: brake controller
- Video: Reese Friction Sway Control Kit Review
- Shop: Reese Weight Distribution System w/ Shank - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Search Results: fastway e2
- Shop: Trailer Hitch
- Q&A: Choosing a Weight Distribution System for a 2006 Toyota Sequoia
- Shop: Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Shop: Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Shop: Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer brake controller
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: hitch
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Shop: Suspension Enhancement
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: etbc7