bing tracking image
Q & A Icon

Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles  

Question:

I have a tandem axle trailer with torsion axles, and a 5000 lb boat on it, I purchased part number T47154007K k, my question is, what disc brake system should I use? I live in florida, use for salt water, Im not sure if I need 1 axle of brakes or 2, front axle or rear axle, or both. could you send me your reccomentdations

0

Expert Reply:

To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted.

With a 5,000lb boat you likely have two 3,500lb torsion axles. The best finish for a salt water application is going to be stainless steel, next would be the KodaGuard and then Dacromet.

For a 3,500lb 10 inch hub and rotor in stainless you will want a quantity of 2 # K1HR35S. Stainless is the best for salt water but can be a bit pricey.

For a 3,500lb 10 inch set of hub and rotors in the stainless and dacromet finish # K2HR35DS.

The set of 10 inch hub and rotors in the dacromet and KodaGuard is # K2HR35DKG.

Depending on your setup length, you will also need a line kit for your disc brakes, I have linked our line kits to this page for you to check out.

You will also want to confirm that your bearing numbers match the above to ensure fitment.

I have linked all the above mentioned products to this page for your convenience.

expert reply by:
0
Jackie C

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>