Recommendations For Carrying 105-Lb Kayak On 2012 Volkswagen CC With No Roof Rack

Question

Question:

Hi there, Im buying a new Hobie PA 12 Kayak and plan to transfer it on the roof of my 2012 VW CC. Because of the weight of the kayak, a yakima boat loader may do a lot of help. I will also need a roof rack thats compatible with the yakima boat loader. Whats your recommendation? Is there anything I should pay attention to for transporting? The PA 12 hull is weight 105 lbs Thank you.

asked by: Michael

0

Expert Reply:

I would love to sell you a roof rack and kayak carrier and load-assist for your Hobie PA 12 but unfortunately we do not have a load assist that can handle the weight of the boat. I do have a solution that will work for you though.

I recommend a trailer hitch like part # C11091 and a small trailer like part # Y08106 to carry your kayak. For a ball mount I recommend part # 3594. for a 1-7/8 inch hitch ball I recommend part # 19256 and for a 2-inch ball I recommend part # 19258.

Most of the rooftop kayak carriers are not designed to hold 105 lbs. The best option for your 105 lb kayak is the Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards # INA446. Another option is the Lockrack carrier # LR54FR. These both have a capacity that will match your roof rack and hold your kayak well. Unfortunately, none of the loaders will handle the weight of your kayak.

If you need a trailer wiring harness on your CC I recommend part # C59236.

expert reply by: Jeffrey L

0

Answer 1

To add a 7-way to your 2023 Palisade you will need to start with a 4-way. At this time, there are no plug and play 4-way options so you will need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236. This is a splice in…

view full answer...

Answer 2

To add a 7-way to your 2023 Hyundai Palisade that does not currently have any wiring, you will first need to start with a 4-way connector. - Curt T-Connector Vehicle Wiring Harness #C43FV After installing the 4-way, you can then use the Universal…

view full answer...

Answer 3

In regards to the wiring for your 2023 Hyundai Palisade, you'll need to go with a hardwire harness like the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236. Then, you'll need an adapter, the 4 to 7-Way with…

view full answer...

Answer 4

We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer. If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch #C13701 would be an excellent choice, with it's tongue…

view full answer...

Answer 5

I'm more than happy to help! The standard towing parts include a trailer hitch, wiring, and a ball mount. The parts I recommend for your 2023 Hyundai Palisade include the following: etrailer Trailer Hitch - #e95ZR Curt Wiring Harness - #C59236…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Recommendations For Carrying 105-Lb Kayak On 2012 Volkswagen CC With No Roof Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching