Frame Mounted Trailer Hitch for Travel Trailer

Question

Question:

I have a 2016 Keystone Outback Travel Trailer. I would like to add a hitch to the RV so I can add a shelf to the back the trailer to hold bikes and a generator. Do you have any hitches that bolt to the frame of the RV?

asked by: Gregory H

0

Expert Reply:

We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer.

If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch # C13701 would be an excellent choice, with it's tongue weight capacity of 500 lbs. For frame members between 22-72 inches apart, use the Curt Hitch # 13703, which has a tongue weight capacity of 350 lbs.

expert reply by: Mike L

0

Donnie H.

1/12/2021

Can I put a hitch adapter on my 2005 amerilite rv trailer. Which has a I-beam bumper?

Reply

Jon G.

1/15/2021

We do have a variety of hitch receivers that install directly on a bumper. Attached is a link to our selection. Just choose whichever one matches with your bumper dimensions.

Helpful Links

dept-pg-rv_and_camper_hitch-sf-bumper_mount_hitch.aspx

Reply

Shawn R.

7/29/2020

I have a 2020 Jayco Jayflight and looking for a hitch to be welded to fram and dropped below the bumper that will not void any warranty and support a 12' enclosed trailer with 2 Harley Davidsons

Reply

Jon G.

8/7/2020

If neither of the hitches that Mike mentioned above will fit then you can filter through the linked selection to find one that fits your frame width. You'll also need to check the weights of your trailer and bikes to make sure they do't exceed the trailer hitch and that your tow vehicle can handle it as well.

Helpful Links

dept-pg-rv_and_camper_hitch-sf-frame_mount_hitch.aspx

Reply

Answer 1

There was an issue with the trailer wiring port on the 2023 Hyundai Palisade discovered early on which increased the protentional for fires. Therefore, all wiring harnesses which utilized this port, which was all aftermarket and factory options at…

view full answer...

Answer 2

In regards to the wiring for your 2023 Hyundai Palisade, you'll need to go with a hardwire harness like the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236. Then, you'll need an adapter, the 4 to…

view full answer...

Answer 3

To add a 7-way to your 2023 Hyundai Palisade that does not currently have any wiring, you will first need to start with a 4-way connector. - Curt T-Connector Vehicle Wiring Harness #C43FV After installing the 4-way, you can then use the Universal…

view full answer...

Answer 4

To add a 7-way to your 2023 Palisade you will need to start with a 4-way. At this time, there are no plug and play 4-way options so you will need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236. This is a splice in…

view full answer...

Answer 5

Not that I'm aware; the correct 4-way for your 2023 Hyundai Palisade is indeed the hardwired Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236.

view full answer...

Answer 6

We have what is needed to add a 7-Way connector. If you already have the flat 4 plug in place, the easiest solution to get to a 7-Way adapter is the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation, #ETBC7L. The pre-wired 7- and 4-way…

view full answer...

Answer 7

I would love to sell you a roof rack and kayak carrier and load-assist for your Hobie PA 12 but unfortunately we do not have a load assist that can handle the weight of the boat. I do have a solution that will work for you though. I recommend a…

view full answer...

Answer 8

To add a hitch to your 2019 Lance 2395 Travel Trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs item #13703. This hitch fits frames that measure from 22" wide up to 72" wide. This hitch works on box…

view full answer...

Answer 9

Yes, the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR is the correct fix for your 2022 GMC Sierra 3500HD. The newer GM trucks had an issue with their running lights circuit not providing enough amperage…

view full answer...

Answer 10

Its in the junction box located under the dash, to the left of the steering column just above the carpeting. The recommended harness to install a Tekonsha brake controller is the Tekonsha Plug-In Wiring Adapter #3016. I attached an install video…

view full answer...

Answer 11

I contacted the Tech Rep at Ultra Fab Products, they stated that it can be mounted underneath but they do recommend it on top. The Ultra-Fab 2" Motor Home Trailer Hitch Receiver, #UF35-946401 is designed, tested and weight rated for an…

view full answer...

Answer 12

The frame-mounted Curt Adjustable Width Trailer Hitch Receiver #13703 is your best option for adding a trailer hitch to your Lance 2185 trailer. This model is designed specifically for trailers like this and it can fit frame widths of 22 to 72…

view full answer...

Frame Mounted Trailer Hitch for Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching