Dimensions of Draw Tite Hitch 24928 For a 2016 Ford Mustang
Question:
Do you have drawings with dimensions that you could send me for these two trailer hitches? Curt #C11405 and DrawTite #24928 The three main dimensions that would help are the distances from: 1 inside of verticle to frame mtg. plate -to- inside of lower vert. plate that round Xtube mounts. to. 2 top of horizontal to frame plate -to- top of Xtube where it is welded to the verticle plate. 3 top of horizontal to frame plate -to- top of tube after it curves down and goes level across to center. Also, what is the extra tab on DrawTite that says for accessories? I have custom exhaust branch resonators that mount inboard of and next to the mufflers, so I need to check fitment.
asked by: Dave
Expert Reply:
I spoke with my contacts at Curt and Draw Tite to track down the dimensions you requested. I was able to get a dimensional drawing from Draw Tite that has what you asked about plus more as well.
For the Curt they state that the first dimension you are looking for is 7.6 inches, the second 5.1 inches and the third 7.2 inches. Looking at the picture of the Draw Tite it looks to be 8.4 inches, 6.96 inches, and 7.273 inches.
Hopefully the diagram helps explain the dimensions better as it was somewhat hard to determine what you were asking for.
There isn't a tab on the Draw Tite hitch for accessories. My contact at Draw Tite wasn't sure what you referred to either.
Products Referenced in This Question
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56088 Review
- Video: Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM11140525 Review
- Search Results: 2" ball
- Search Results: euro hitch
- Shop: Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Least Visible Trailer Hitch Recommendation for 2018 Ford Mustang
- Shop: Performance Chip Tuners
- Shop: Tekonsha Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Search Results: 44649
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Search Results: 68149
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Search Results: 25580
- Q&A: Adding Brakes to a Mobile Home Axle
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2019 Chevrolet Equinox
- Search Results: dust cap