Will Curt Hitch 13432 Fit a 2010 Jeep Wrangler Unlimited Sport 4 Door

Question

Question:

Just want to confirm that this item will fit a 2010 Jeep Weangler Sport Unlimited 4 door 4x4.

asked by: Rick V

0

Expert Reply:

Yes, the Curt # 13432 hitch will fit your Wrangler Unlimited Sport. I have added a link to the instructions below for you to review. I also included a link to the wiring for your Wrangler if you will be doing any towing or using lights on a cargo carrier.

To complete the towing set up I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag.

expert reply by: Patrick B

0

Answer 1

According to the installation instructions for the Curt Trailer Hitch Receiver #13432 they say that you need to detach the muffler from the hanger to ease the installation. We have had some customers install it on their 2018 JL Wranglers though and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The EcoHitch #EH84GR is indeed a fit for the 2021 Tesla Model 3, it'll work great for you. When the removable receiver is detached, the hole in the underside of the bumper fascia can indeed be covered using part #306-XA2002. I've provided a…

view full answer...

Answer 6

The dimensions of the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver # 306-XA2002 that you referenced is 8-1/2" long by 5-1/16" wide by 1/8" thick. Your hole being initially cut with a 4 inch hole saw would…

view full answer...

Answer 7

Hey John, so there's not a huge difference between the two trailer wiring kits you mentioned that fit your 2018 Jeep Wrangler Unlimited but since we have the best luck with Tekonsha kits I would go with the part #118416 over the Curt #C55124.

view full answer...

Answer 8

Hey Jeff, I doublechecked the Curt Trailer Hitch Receiver #C13392 and #13432 as they are labeled with their capacities and also reached out to Curt for confirmation. After speaking with Curt we found that their website incorrectly listed the…

view full answer...

Answer 9

Yes, the Kuat Pivot 2 Swing Away Hitch Extender #PVD20B does have a weight capacity of 250 lb.

view full answer...

Answer 10

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

view full answer...

Answer 11

The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #36424 has been discontinued but was a fit for the standard bumper on a 2018 Jeep Wrangler JL. It will not slip over the bracket you reference so it is not a fit for your…

view full answer...

Will Curt Hitch 13432 Fit a 2010 Jeep Wrangler Unlimited Sport 4 Door

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching