Kuat Pivot 2 Swing Away Hitch Extender # PVD20B Weight Capacity

Question

Question:

What is the weight capacity of this item when the arm is extended? PVD20B

asked by: Scott C

0

Expert Reply:

Yes, the Kuat Pivot 2 Swing Away Hitch Extender # PVD20B does have a weight capacity of 250 lb.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The Kuat Pivot 2 Swing Away Hitch Extender part #PVD20B can be used with bike racks, cargo carriers, or any other 2" hitch mounted accessory for that matter. In regards to weight, you have a 250 lb limit so this will be the weight of the…

view full answer...

Answer 3

The Kuat Pivot Swing Away Hitch Extender part #PVP20B is designed specially to be used with the Kuat NV 2.0, NV Base 2.0, and Sherpa 2.0 bike racks. However, I don't see any reason that you could not use the swing hitch extender with a hitch…

view full answer...

Answer 4

I have a bike rack that will work great but the closest I can get to one with a swing away feature is the RockyMounts BackStage Bike Rack item #RKY10002 and it tops out at 60 lbs per bike. For two 75 lbs e-bikes, I recommend the Hollywood Racks Sport…

view full answer...

Answer 5

Most of the time people want the pivot to swing out to the passenger side of the vehicle like what the part #PVP20B offers. This is because if you were for some reason on the side of the road and needed to get into the back of the vehicle you could…

view full answer...

Answer 6

Since your bikes weigh 60lbs and have fenders an option like the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR you were looking at would be a great choice. It has a per bike capacity of 80lbs and uses padded clamps to attach to the…

view full answer...

Answer 7

Yes, with the Kuat Pivoting assembly part #PVD20B swung out all the way you would be able to fully swing open the rear door of your Sprinter. We had a customer with a similar Sprinter send us a picture where you can see that it would give the…

view full answer...

Answer 8

The Yakima OnRamp Bike Rack for 2 Electric Bikes part #Y36FR is an excellent bike rack option for electric bikes. It has a unique frame clamping system which works on a wide variety of bike frames. It has a 66 lb per bike weight capacity which is…

view full answer...

Answer 9

The best option we will have for your 2022 Ram ProMaster 3500 RV is going to be the Roadmaster Spare Tire Carrier #RM-195125. The Kuat #PVD20B and other swing away adapters were never designed to hold weight in the fashion you are wanting. The…

view full answer...

Answer 10

The wheel mount of the Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray #NV22G doesn't have to rest against the front forks of a bike when clamping down so you should have no problems flipping the bike around and…

view full answer...

Answer 11

The etrailer spare carrer part #e98ZR can carry your 6 bolt wheel with the finished side of the wheel pointed out and can be used on a hitch pivoting adapter like the Yakima #Y02483. The Kuat adapter can only be used with Kuat bike racks.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Kuat Pivot 2 Swing Away Hitch Extender # PVD20B Weight Capacity

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching