Axle Diameter and Tire Size of Rack 'Em # RA20 Trailer Dolly

Question

Question:

Hello, I have a Rackem trailer dolly and want to put bigger tires on it. Do you guys have bigger tires that will fit on the axel? if not can you tell me what the axel diameter is and rim size is ? Thanks

asked by: Jordan B

0

Expert Reply:

We do not offer a larger tire for the Rack 'Em # RA20TIRE trailer dolly. The axle diameter is 11/16 of an inch, and the rim is 6 inches in diameter. The tire size is 4.00 x 6.

expert reply by: Mike L

0

Answer 1

I went and pulled a part #RA20TIRE from our warehouse to measure the axle hole diameter and found that it measures 11/16 inches.

view full answer...

Answer 2

So long as a hub uses the correct bearings that match the dimensions of the spindle that is on the axle there is no worry about using two different brands of products, such as a Dexter hub on a Lippert axle. That in itself is not a concern. When a…

view full answer...

Answer 3

You are correct, the Fulton Snap Ring, #FP908600, and Bulldog Snap Ring, #BD500241, are very similar. I went out to the warehouse and pulled both parts to measure them using digital calipers. Both had the following measurements: Inner diameter = 2.28…

view full answer...

Answer 4

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…

view full answer...

Answer 5

The Rack'Em Trailer Dolly #RA20 that you referenced can move along surfaces other than flat asphalt. The question of how hard would it be to move your trailer really has a lot to depend on the size of your trailer and the size of the person…

view full answer...

Answer 6

I would be happy to! The bottom of the foot to the center of the pipe mount is 10-1/2" when retracted and 24-1/2" when fully extended on the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option item #TV64FR. Sorry I do not…

view full answer...

Answer 7

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...

Answer 8

The Trailer Valet XL Trailer Dolly part #TVXL25 that you referenced uses a solid rubber tire, part #TVXLSR so there would be no inflation valve to add air. However, I think you might have the Trailer Valet 5X Swivel Jack and Trailer Mover part…

view full answer...

Answer 9

I reached out to Trailer Valet to get an answer for you, and they told me that the older Trailer Valet XL cannot swap out its pneumatic tires with the Replacement Solid Rubber Tire #TVXLSR. They went on to say that attempting to do this would remove…

view full answer...

Answer 10

If I had to guess the valve stem is bad and if you put pressure on it leaks. What you'd want to do is replace the inner tube with the part #TVIT.

view full answer...

Answer 11

The tire part #TVTR that you referenced is a Load Range B tire in the size of 2.80/2.50-4 which means it does have a 250 lb per tire capacity. The Trailer Valet that this is used on is the #STC-V211 which has a 500 lb capacity total. The Trailer…

view full answer...

Answer 12

view full answer...

Axle Diameter and Tire Size of Rack 'Em # RA20 Trailer Dolly

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching