Mounting Angle for Tekonsha Prodigy P3 Brake Controller # 90195
Question:
As long as I maintain the units alignment with the direction of travel, can I mount the unit at any angle front to back. i.e. the dash is at a steep angle where I would like to mount the P3 Unit, will it effect the performance if I mount it at a 45* angle to horizontal?
asked by: Steve F
Expert Reply:
As long as the controller is installed parallel to the direction of travel, and is level on a side-to-side plane, you can certainly mount the Tekonsha Prodigy P3 # 90195 at a 45 degree angle to match the slope of your vehicle's dashboard.
If you click the provided link, you can see the installation instructions. I've also linked you to our Brake Controller FAQ article.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Reese Dual Cam II Weight Distribution System Review
- Shop: Reese Dual Cam II Weight Distribution System w/ Active Sway Control - No Shank - 8K GTW - 800 TW
- Shop: Brake Controller
- Article: Overview of Lubricating Grease
- Q&A: Correct Weight Distribution Hitch For My 2002 Dutchman bunkhouse 26 BH26
- Video: Review of Reese Weight Distribution - WD With Sway Control - RP66073
- Video: Master Lock Hitch Pins and Clips - Standard Hitch Pin - ML1465DAT Review
- Search Results: receiver pin
- Shop: Trimax Trailer Hitch Pin and Clip for 2" Hitches - 3-1/2" Span - Chrome
- Shop: Trimax Trailer Hitch Pin and Clip for 1-1/4" Hitches - 2-1/2" Span - Chrome
- Shop: Gen-Y Hitch Pin and Clip for 2" Hitches - 5/8" Diameter x 3-1/2" Span
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Shop: Curt Pin and Clip for 2" Hitches - 5/8" Diameter x 2-3/4" Span
- Shop: Hitch Pin and Clip For 2-1/2" and 3" Hitches - 5/8" Diameter x 4" Span
- Video: Reese Dual Cam High-Performance Sway Control Review and Installation
- Video: Reese Weight Distribution Shank Review
- Video: Reese Strait-Line Weight Distribution System Installation - on a 2017 Chevrolet Silverado 2500
- Video: Reese Weight Distribution RP54970 Review
- Q&A: Were Cams of Reese Dual Cam III Upgraded from Previous Version
- Q&A: Overall Length of the Replacement Trunnion Spring Bar Part # RP22225
- Q&A: Correct Shank for Pro Series Tri-Hitch Ball Platform
- Q&A: Shank Recommendation with 2 More Inches of Drop Than RP54970
- Q&A: Weight Distribution for 6000 Pound Trailer Towed By 2007 Chevrolet Silverado
- Q&A: How to Pick Out a Weight Distribution System for a 33BHTS Jayco
- Shop: Suspension Enhancement
- Shop: BOLT brand vehicle and hitch locks
- Search Results: locking hitch pin
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Search Results: tekonsha p3
- Shop: Vehicle Tow Bar Brake System
on Trailer Brake Controller
