Do the Covercraft CarHartt Seat Covers SSC2412CAGY Fit a 2016 Ford F-250

Question

Question:

this says it fits 2016 but the picture is wrong i have a center console please advise

asked by: Danny

0

Expert Reply:

The product picture for the # SSC2412CAGY is a typical photo. Since we do not have a picture (yet) of this product installed in a truck like yours we instead use a product picture that shows a similar set of seat covers installed in a similar truck that has a slightly different setup.

The # SSC2412CAGY is designed to fit trucks that have two front bucket seats where the truck is a crew cab, regular cab, SuperCab, or Supercab. If that is the setup that you have and there is a center console these covers will fit and come with the center console.

expert reply by: Jameson C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…

view full answer...

Answer 6

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Answer 7

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 8

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 9

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 10

The total weight of the PullRite OEX SuperLite 5th-Wheel Hitch for Ram Prep Package(4815) #PUL56ZR is 143lbs. The Head #PUL99ZR weighs 49lbs while the Base #PUL56ZR weighs 94lbs. While we do not carry the 2600 currently(5/15/2024) it has a total…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

In regards to a Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter like part #RP94720 and a Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like part #325-GH-8045, the main difference is that one uses air for…

view full answer...

Do the Covercraft CarHartt Seat Covers SSC2412CAGY Fit a 2016 Ford F-250

Product Page this Question was Asked From

Continue Researching