Replacement Double Eye Leaf Springs For Older Snowmobile Trailer
Question:
I have an old snowmobile trailer with a broken leaf spring. The dimensions as best I can tell are: A = 23 1/4 B = 3 C = 11inch - 11 1/2 1 1/4inch wide I dont find any springs 1 1/4inch wide. Are these so old they are unavailable now?? Sincerely
asked by: Jim H
Helpful Expert Reply:
I have a solution for you, but we do not carry any leaf springs that are 1-1/4 inches wide. It is possible that the springs are specific to the trailer manufacturer or came from a specific application.
Based on the dimensions you provided, the closest match we have is the 3-Leaf Double-Eye Spring # e59SR. This leaf spring measures 23-1/8 inches from center of eye to center of eye. This spring is 1-3/4 inches wide.
If you do not have room to add a wider spring to your spring hangers, I have attached a link to all of our suspension kits for 1-3/4 inch wide springs. These kits will include hangers for both sides of the trailer, since it is recommended to replace all the springs as the same time.
Our most popular kit for a single axle trailer is the Redline Single-Axle Trailer hanger Kit for Double Eye Springs # APS1. The hangers in this kit measures 1-1/2 inches for the front and 1/8 inches tall for the rear hangers. The shackle straps are 3-1/8 inches. This kit is designed to be used with axles between 2,000 - 7,000 pounds.
The # e59SR double eye spring is designed for use on trailer with an axle capacity of 3,500 pounds.
If the axle capacity for this spring doesn't match your snowmobile trailer's axle capacity, you can let me know the capacity for your trailer and I'll be happy to make a recommendation.
I have also attached a help article on double-eye springs for you.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Redline
more information >
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 3500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 23-1/8 Inch Long
- Painted
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Leaf Spring Recommendation for 2,200 lb Snowmobile Trailer
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long
- Shop: 4-Leaf Slipper Spring w/ Hook End for 5,000-lb Trailer Axles - 26-5/8" Long
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Article: Double-Eye Trailer Suspension System Review
- Shop: Vehicle Tow Bar Wiring
- Q&A: Does 4-Way Trailer Wiring Harness Have Reverse Light Feature
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Shop: Base Plate for Tow Bar
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: Trailer Tire Sizing
- Search Results: equalizer
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
on Trailer Suspension Parts
