Leaf Spring Recommendation for 2,200 lb Snowmobile Trailer

Question

Question:

The trailer is 2200 he so I guessing 2000

asked by: Ryan

0

Expert Reply:

You have slipper springs now. If you wanted to convert both sides of the trailer to double eye you certainly could.

What axle capacity do you have?

expert reply by: Jameson C

0

Ryan

11/1/2017

The trailer is 2200 he so I guessing 2000

Reply

Jameson C.

11/1/2017

For a set of 26 inch long leaf springs we have the part # e77SR which are 2k in capacity. Then for a hanger kit we have the part # APS4 which would work well.

Reply

Answer 1

For your snowmobile trailer I recommend going with a Timbren Axle-Less system such as #ASR2000S01. I have included a link to all the options rated for 2,000 pounds. The benefit is that you won't have an axle beam to rust and you still get the…

view full answer...

Answer 2

I have a solution for you, but we do not carry any leaf springs that are 1-1/4 inches wide. It is possible that the springs are specific to the trailer manufacturer or came from a specific application. Based on the dimensions you provided, the…

view full answer...

Answer 3

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 4

For the factory brake controller on your 2017 Chevy Silverado 1500, the factory brake controller will install to the same location as an aftermarket wiring harness like #3016. The black box to the left of your brake pedal is the location with the…

view full answer...

Answer 5

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…

view full answer...

Answer 6

The Demco Channel Only Trailer Actuator, part #DM8202022, was designed to be used with drum brake applications only. You could use this actuator with disc brakes, but you would have to replace the master cylinder in the actuator with the Demco disc…

view full answer...

Answer 7

The breakaway system battery is not related to whether or not your truck will sense a trailer connection. It actually will look for the slight amperage draw that brake magnets create to determine this. While I strongly recommend waiting to have your…

view full answer...

Answer 8

You will want to use a standard 12 volt deep cycle trailer battery to operate the interior light. You will NOT want to use a trailer breakaway battery. The breakaway battery is not designed to power other trailer accessories or lighting, it is just…

view full answer...

Answer 9

Thank you for all of the information! One of the common misconceptions with trailer wiring is that you just match up the colors so you are definitely not alone in that regards and I'm glad that you were able to correct the issue. Connecting your…

view full answer...

Answer 10

I can certainly help you with that. Since the Curt T-Connector Vehicle Wiring Harness, part #C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights,…

view full answer...

Leaf Spring Recommendation for 2,200 lb Snowmobile Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching