Recommended Fairing For Rhino-Rack Vortex Crossbars on 2013 Subaru XV Crosstrek

Question

Question:

I have a 2013 Subaru XV Crosstrek and installed the Rhino Rack Vortex SX Roof Rack a few months ago. I am looking for a product to stop or significantly decrease wind noise. I believe the website says the Rhino Rack Wind Fairing is not compatible with my vehicle. Any suggestions? Thanks.

asked by: Derek

0

Expert Reply:

The fairing I recommend is part # RRRF2.

This fairing will work with crossbars up to 1-1/4 inch tall and 3-1/2 inches wide. The Rhino-Rack Vortex crossbars measure 1-3/16 inches tall and 3-1/8 inches wide so it is within the dimensions for the RRRF2. This fairing is 38 inches wide and requires 30-1/2 inches between crossbar legs.

We also offer a longer fairing, part # RRRF3. This fairing is 44 inches long and requires 35-1/2 inches between the crossbar legs.

expert reply by: Jeffrey L

0

Answer 1

The great thing about the Yakima roof fairings is that there are several lengths available and they mounting hardware allows it to fit all crossbar dimensions. The trick to picking out the correct size is to measure the distance between the feet of…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Recommended Fairing For Rhino-Rack Vortex Crossbars on 2013 Subaru XV Crosstrek

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching