Fairing Recommendation for 2018 Subaru Crosstrek

Question

Question:

What size fairies g do I need for a 2018 Subaru Crosstrek with oem tails and Thule Ski rack system ?

asked by: Stephen F

0

Expert Reply:

The great thing about the Yakima roof fairings is that there are several lengths available and they mounting hardware allows it to fit all crossbar dimensions. The trick to picking out the correct size is to measure the distance between the feet of your roof rack and go with the fairing that best matches that dimension.

So for a 40 inch fairing we have part # INA261, 44 inch part # RRRF3, 48 inch # INA262, and 31 inch part # INA260.

expert reply by: Jameson C

0

Answer 1

The Inno fairings are designed to fit most crossbar dimensions. So the 48 inch long Onno fairing part #INA262 would fit and do a great job reducing the wind noise created by your crossbars. It will divert air over the bars which means considerable…

view full answer...

Answer 2

The fairing I recommend is part #RRRF2. This fairing will work with crossbars up to 1-1/4 inch tall and 3-1/2 inches wide. The Rhino-Rack Vortex crossbars measure 1-3/16 inches tall and 3-1/8 inches wide so it is within the dimensions for the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...