Review of Roadmaster Anti-Sway Bars - Axle Stabilizer - RM-TRACV-10B Video

The Roadmaster Front Anti-Sway Bar #RM-1139-148 uses a 1/2-13 x 2” grade 8 bolt for the front brackets. I have in the past ran into this issue before but it's not very common so I would just run to your local hardware store and get some 1/2-13 x…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

For your 2001 Ford F53 Chassis with the Roadmaster TruTrac Front-Axle Trac Rod #RM-TRACV-10B installed I recommend the Firestone Ride-Rite Air Helper Springs #F2170. This kit will mount in front of the axle so that it will not interfere with the…

I spoke with my Roadmaster representative, and explained the problem you are experiencing. There is not a repair kit available for the problem you describe, but my rep told me that is sounds as if the anvil bolt on the end of the inner arm has come…

There is a brake controller port on your Ford-based Forest River Class A motorhome but it is tucked away behind the instrument cluster and can be tough to find. Ford offers a document, Q-206, that can help you locate it. I also included a photo of…

For your 2022 Thor Outlaw 29J motorhome on a Ford E450 chassis, the correct steering stabilizer is the Roadmaster Exact Center Steering Stabilizer #RM47MR. I verified the fitment of the #RM47MR directly with Roadmaster for you, and it does come with…

I have two refrigerators that are close to the size you're wanting. The Everchill Refrigerator #324-000119 has a width of 23-1/2 inches a depth of 24-3/4 inches and a height of 59-5/8 inches. A Furrion option is 24-1/4 inches wide, 25-3/4 inches…

I was able to get the measurement you were looking for from the spring to the top of the bracket of the Timbren Front Suspension Enhancement System #TFFF53B. As you can see in the accompanying photo, that length is 7 inches. This is a fit for the…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

According to my research the Roadmaster Rear Anti-Sway Bar part #RM-1259-109 will install on the 2004 Newmar Scottsdale that is on a 2003 W-22 Workhorse chassis. The Newmar Scottsdale from my research is 33-1/2 ft so according to Roadmaster you will…

The Roadmaster Rear Anti-Sway Bar #RM-1139-143 that you referenced is designed to work with a factory sway bar and not replace it. For more information on this sway bar check out the review video and install instructions link I attached.