Roadmaster Anti-Sway Bars RM-4139-127 Review Video

I pulled the Roadmaster Polyurethane Bushing Kit #RM-4139-127 from our warehouse and took measurements for you. The metal bracket measures 4-1/2 inches center on center holes and 6-3/16 inches outside to outside. The linked photos show you the key…

The 2008 Winnebago Journey Motorhome was built on a Freightliner XC chassis. Given that information, the correct sway bar is the Roadmaster Front Anti-Sway Bar #RM-1209-136.

I would be happy to help you find those parts for your 2018 Forest River FR3 Motorhome. We have 3 different OEM bushing kits depending on which size sway bar your Motorhome came with. The first is the Roadmaster Polyurethane Bushing Kit for…

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

The E5 code on your Fogatti RV Tankless Water Heater - Gas - Automatic Pilot - 41,800 Btu - White Item #LSB64FR means you're having a fan failure/no fan signal detected during start-up or water heater operation. You'll first want to ensure…

We have just what you are looking for. The biggest improvement you can make with sway for your 2019 Jayco Precept 29V is with a new rear sway bar. For that you'd want the part #RM-1139-145. The next biggest improvement you'll make is with a…

The blue domed bushings in the Roadmaster Rear Anti-Sway Bar kit #RM-1139-145 are shown in the linked photo. Dimensions are indicated for you. Please note that the bushings and hardware for this sway bar are offered on their own as kit #RM-4139-127.…

The Roadmaster #RM-1139-149 Rear Anti-Sway Bars that you referenced are the correct sway bars and hardware to replace those on your Ford F53 chassis. The bar is 1-5/8" thick and constructed from 4140 Chromoly steel for outstanding rigidity and…

The Roadmaster Rear Anti-Sway Bar #RM-1139-143 that you referenced is designed to work with a factory sway bar and not replace it. For more information on this sway bar check out the review video and install instructions link I attached.

I was able to get the measurement you were looking for from the spring to the top of the bracket of the Timbren Front Suspension Enhancement System #TFFF53B. As you can see in the accompanying photo, that length is 7 inches. This is a fit for the…

Assuming that you're needing the steel U-clamp and replacement bushing for a Roadmaster #RM-1259-105 front anti-sway bar installed on your motorhome built on a 2003 Workhorse W22 Chassis, the replacement U-strap is part #RM-B141 and the…

When installing the Roadmaster Split Bushing for Anti-Sway Bar part #RM205222-10, I recommend using the LubriMatic Marine Trailer Wheel Bearing Grease part #L154FR. This is the same type of aqualube grease that comes with the kits from Roadamster.