What Size Crossbar is the Y8840018 Designed to Fit

Question

Question:

What round bar sizes will this clamp fit?

asked by: Bll

0

Expert Reply:

The Replacement Hardware Bag # Y8840018 that you referenced is designed to fit Yakima crossbars which are 1-1/8 inches in diameter.

expert reply by: Jameson C

0

Answer 1

The 8004039 you mentioned is the Yakima HullRaiser kayak carrier, and we do have what you need to connect the carrier to your square crossbars (1-1/4 inch by 3/4 inch crossbars are technically rectangular but are called square for whatever reason).…

view full answer...

Answer 2

Yes, the Yakima Universal MightyMounts #Y03590 will fit great with the Thule square crossbars whether they are the new or old generation. These adapters are great for older Yakima products that were designed to fit one specific type of crossbar.…

view full answer...

Answer 3

We have the Sportrack Kayak Carrier #SR5511 available that can fit crossbars that are 1-1/2 inch square like what you have so this would be a great solution. It's a J-style carrier which is easier to load from the side. We don't have…

view full answer...

Answer 4

I reached out to my contact at Yakima who said that the Universal MightyMounts #Y03590 will work with your old Mako Saddles. He did say that when you install them that you will need to install them using the holes that are lined up. You will need…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

What Size Crossbar is the Y8840018 Designed to Fit

Product Page this Question was Asked From

Continue Researching