Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
(167 reviews)
Price: $378.63
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
Item # C15810
Retail:$657.95
Our Price: $378.63
You Save: $279.32
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (167)
- Q & A (0)
- Photos
- Used (1)
CURT Trailer Hitch - C15810
- Class V
- 2-1/2 Inch Hitch
- 20000 lbs GTW
- Visible Cross Tube
- CURT
- 2700 lbs TW
- 20000 lbs WD GTW
- 2700 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Carbide black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2-1/2" x 2-1/2"
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 20,000 lbs
- Maximum tongue weight: 2,700 lbs
- Maximum TW when used with weight distribution: 2,700 lbs
- Maximum gross trailer weight: 20,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15810 CURT Class 5 CD Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2016 Ford F-250 Super Duty
- 2005 - 2014 Ford F-250 Super Duty Pickup
- 1999 - 2004 Ford F-250 Super Duty Pickup - Standard or Step Bumper
- 2015 - 2016 Ford F-350 Super Duty
- 2005 - 2014 Ford F-350 Super Duty Pickup
- 1999 - 2004 Ford F-350 Super Duty Pickup - Standard or Step Bumper
- 2008 - 2015 Ford F-450 Super Duty Pickup
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" - C15810
Average Customer Rating: 4.8 out of 5 stars (167 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Kevin02/28/2024
Well built hitch and very easy to install. Needed a hitch capable of towing a 12K loaded toy hauler and this hitch easily handles the load. Very happy with it after using it for the last year.
by: Corey 04/22/2024
Seems to be good so far the powder coating or paint is still in good shape and we get alot of salt on our roads, so that’s a plus and so far the pin hole has not wallowed put I don’t tow super heavy 10kish but it’s been good so far
by: Robert03/30/2023
Wanted a 2.5 receiver for my 2001 Super Duty. Went through two different DrawTite receivers first. The first one had a crooked receiver tube. Never tried to install. The second one I tried to install but it hit the bumper before being able to tighten up to the frame. etrailer was great about sending prepaid labels to ship back. Just a pain to have to re-wrap and take to UPS drop-off. etrailer would not send the Curt as a replacement. Got credited for the DrawTite hitch and I ordered the Curt Hitch. Had it installed in 20 minutes. Factory wiring harness mount bolted right up. Curt hitch is well built and seems to have a better finish than the DrawTite.
by: Steve04/24/2024
Ford F-350 Super Duty
The box was destroyed but other than some missing paint I don't think anyone could hurt this hitch because it's a tank. I would like suggestions on what paint to use for touching up the scratches.
I bought it to replace the 2 1/2 inch OEM hitch (2015 F350) which is nowhere near this capable. I'm looking forward to installing it and no longer worrying about tongue weight limitations. As always thanks etrailer! You remain one of the best companies I've ever dealt with.
by: Jimmy D12/09/2023
2006 Ford F-250 Super Duty
I used this to replace my factory Ford 2 1/2 inch hitch. This thing is twice as heavy and has a lot more rating. I strapped this monster to my motorcycle jack and installed by myself. I tow a 26 ft. deck over triple axle trailer. Thank You.
by: Dwain11/08/2023
The hitch is working great. The reason I didn't give it 5 stars is because I had to use some bolts & hardware off of the old hitch. The new hardware didn't fit in some places due to tight clearances. But I was able to install it fine. Thanks for checking up. This reminds me that I need to get back up there & check to make sure everything is right & tight!
by: William 09/13/2023
So far so good! Easy installation and fit my truck as advertised. With proper 2-1/2" hitches (vs adapters) the connection is solid. I'll never exceed the capacity of the hitch receiver, so I expect it to last. A few rust bits where the coating has been disrupted, but so far holding up to New England winter/dirt roads
by: Michael 03/07/2024
My hitch came in 2 days and was exactly as described. Super happy with e trailer. Love the instruction videos, very helpful.
by: Joshua L07/08/2017
2008 Ford F-250 Super Duty
Curt receivers are great quality, plus etrailer had my order shipped the same day and was delivered the next day!
One lesson learned for me was this particular hitch (15810) does not fit with the spare tire on a 2008 F-250.
Thanks again for a great product and extremely fast shipping and customer service! I definitely recommend using etrailer over large box stores.
by: Andrew C02/04/2017
2000 Ford F-350 Super Duty
The hitch has held up nicely for the year that I have had it on my truck. It is very stout. The paint has held up well to the elements so far.
It went on fairly easily and all of the holes lined up. It was helpful to have a second person to help hold the hitch in place in order to get the first bolts in.
I purchased this hitch when I realized that the hitch that came with my truck was only rated at 3500lbs, a fair bit less than the trailer I tow..
The box that it came in barely held up to the shipping monkeys on the way out to the Seattle area.
by: Jeffrey06/16/2023
2006 Ford F-350 Super Duty
Item was delivered quickly with all the bolts and it fit my truck perfectly.
by: Dwayne05/08/2019
1999 Ford F-250 and F-350 Super Duty
The Curt 20,000 pound commercially rated receiver is is built like a battleship! And while it was difficult to man handle alone, I was able to install it using the eight supplied bolts in about 20 minutes. The fit was positively perfect, so someone at Curt did their homework on the design. The only complaint I have is that unlike my Reese Hitch, it did not include the 2" reducer sleeve. A lousy $15 difference! Don't be cheap, for this kind of money it should be included. Now I get to pay $25 in shipping for a $15 part.
by: Steve C.05/31/2017
2017 Chevrolet Traverse
Ordered Thursday evening just before Memorial Day weekend, and arrived Tuesday afternoon. Was shipped out very quickly with update emails through the entire process! Although the box was a bit torn up from shipping the hitch was still in great shape with all hardware and the wiring for another vehicle I ordered, in the box. Hitch is amazing quality, VERY heavy duty, and bolted right into place! I did have to forgo the nice factory wiring/plug mount and zip tie them into place, but other than that it was a perfect bolt on affair! Will definitely do business with these folks again
by: Brandon B08/03/2023
Awesome website, they made the process simple, kept me updated with emails, and delivered the product on time. Companies like this that handle their end, and keep good communication are things we need more of. 10/10
by: Stefan08/10/2022
Excellent build quality and installation was very easy. Needed an extra set of hands during install due to the weight of the receiver.
by: Robert 03/07/2024
All around great first time experience! Mike was great and the product showed up way before I was expecting and it fit perfectly.
by: Joss10/05/2023
2005 Ford F-350 Super Duty
This unit fit so perfectly on my 2005 f-350 srw. Once again I'm impressed with this company and how quick it came in. Anything I ever need for a trailer I will do business with these people
by: Keith 03/22/2024
Thank you very much!
by: Brian 06/21/2023
2001 Ford F-250 Super Duty
Fits the 2001 Ford F250 really well. It's quite a bit larger than the class 4 hitch we removed.
by: Loren04/17/2020
1999 Ford F-250 and F-350 Super Duty
Heavy duty receiver. Easy install, but definitely need two people because it is heavy. Will handle all my trailers.
by: Kevin 07/29/2023
Order came super quick, looks and fits great! Was able to do by myself with help from a strap and a couple clamps.
by: Jackson 10/27/2023
I’ve never had any issues with the hitch, it’s very solid for heavier towing, all around a good product
by: Kurt 12/09/2023
2012 Ford F-250 Super Duty
Shipping was fast! Packaging was intact. Product was in excellent shape and installed easy.
by: Jonathan 11/30/2021
Outstanding product, higher towing capabilities. Superior Construction and Strength. Added feature for any SRW trucks, quarter ton or one ton. Maximum potential and peace of mind. Worth the upgrade to a Type V.
Jonathan
12/29/2022
It has been a year since my type V tow bar was replaced. It has met all of my expectations and performed extremely well. Strong, sturdy, outperforming the type 3 it replaced. I have been capable of towing virtually anything my truck can handle. For best results and less stress pair it up with a quality torsion-flex technology product compatible with your Class V tow bar for less stressed towing. Long story short. I made the right investment for my business and my truck. Versatility is the name of the game.
by: Jerry 01/18/2022
Nice Hitch. Good price and great shippi ng
Bubba
1/19/2023
AWESOME Heavy Duty Hitch - Needed the hitch to pull my 13K boat and I never have had an issue - I feel confident and secure using this hitch.
25
167
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Will the Curt Trailer Hitch C15810 Fit a 2005 Ford F-350 With 18 Inch Spare Wheel/TireThe tech tip that you are referring to on the Curt Trailer Hitch Receiver part # C15810 for your 2005 Ford F-350 is in reference to the diameter of the wheel. Since you have an 18" diameter spare wheel under your truck then you will not have any issues installing this trailer hitch. In order to mount your 4 and 7-way trailer connector to the above trailer hitch you will need to use the Curt Easy Mount Bracket for Trailer Connectors part # C58003 or the Curt No-Drill Bracket for Trailer...
view full answer... - Does The Curt Trailer Hitch Receiver # C15810 Require Drilling To Install On a 2009 Ford F-350?The Curt Trailer Hitch Receiver # C15810 is a custom fit receiver which should not require drilling to install on a 2009 Ford F-350 Super Duty. If you have a cab and chassis version F-350 you will want the Curt Trailer Hitch Receiver # C15845 and this will require drilling to install. This receiver is similar to the receiver # C15810 in having a 2-1/2" receiver. If you are unsure if you have a cab and chassis or Super Duty you can check the vehicle information sticker inside your door frame....
view full answer... - Recommended Class V Hitch for 2001 Ford F-350 Long Bed PickupThe Curt # C15845 Class V hitch you'd looked at fits cab and chassis model trucks only, because cab and chassis trucks use a narrower frame spread (outside to outside distance between frame members) than the pickup models do. For a 2001 F-350 Long bed pickup, use the Curt Class V hitch, part # C15810. The hitch has the same 20K towing 2.7K tongue weight capacity and 2-1/2 inch receiver as the hitch you'd looked at, but it will fit your frame spread. The hitch will install using existing...
view full answer... - 7-Way Mounting Bracket Recommendation for Use with Curt Trailer Hitch C15810The Curt hitch part # C15810 does not have a bracket built into it for mounting trailer wiring. Since your truck has a 7-way what you'd want is a 7-way mounting bracket like part # HM48625 which will attach to the bumper of your truck and allow your 7-way to attach to it. Don't install this on the hitch though as you shouldn't ever drill into the hitch.
view full answer... - Trailer Hitch Receiver Class V for 2006 Ford F-350 with 40 Gallon Tank Behind AxleThe Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15810 is a confirmed fit for a 2006 F-350 Super Duty. The fuel tank location you gave is normally for a Cab and Chassis model according to my contact at Curt, so you will need the # C15845 instead if your vehicle frame is 34 inches wide outside to outside.
view full answer... - Which Class V 2-1/2 inch Hitch Would Fit 2000 Ford F-350 Cab and ChassisI have a Curt Class V 2-1/2 inch that fits your 2000 Ford F-350 cab and chassis with the # C15845 but the # C15810 was not designed to fit the narrower cab and chassis truck frames so it would not work for you. We've spoken with Curt in the past about the fuel tank you have and they said this hitch was designed to accommodate the tank.
view full answer... - Spare Tire Fitment with Class V Hitch on 2000 Ford F-350 The Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15810 is a fit for the standard or step bumper of your truck. With this hitch, spare tires 20" and larger will not be able to be stored in the original location underneath the vehicle. If you instead go with the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15410 then your spare tire will fit if you have a 20 inch spare or smaller. If you use the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V...
view full answer... - Availability of Hitch Extender that Can Give 24 inches to Clear Tailgate When Towing TrailerWe have a Curt hitch extension part # C45048 which can be cut down to 24 inches like you'd need. But you'd need to have a 2-1/2 inch hitch installed on your vehicle. It looks like you have a 2008 Ford F-250 or 350 so if that were the case you'd need the part # C15810 for a hitch that's a fit for the vehicle and compatible with the extension.
view full answer... - Torque Specs and Install Instructions for Curt Hitch on 2006 Ford F-250I have added a cut out of the installation instructions, which are linked on this page and also linked on the product page of the Curt Trailer Hitch # C15810 that fits your 2006 Ford F-250. You can refer this cut out or you click either link to the instruction manuals. The reason they are not stated outright in the video is because on rare occasion manufacturers change these specs.
view full answer...
- Trailer Hitch and Wiring Recommendation for a 2001 Ford F-250 Stake Pocket TruckIf there is no trailer wiring at all at the rear of your 2001 Ford F-350 with a stake bed you are going to have to hardwire in a 4-way and then a 7-way adapter after. If there is a 4-way connector currently or you find the square connector that the part # 20031 attaches to you could go that route as well. For a hardwire 4-way you would need the part # 18252. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If...
view full answer... - Curt Trailer Hitch Receiver # C15810 Weight Capacity Without Weight DistributionThe Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15810 is rated for a max towing weight of 20,000 lbs and a maximum tongue weight of 2,700 lbs whether you are using weight distribution or not. The only benefit to weight distribution with this hitch is a smoother ride and sway control if using a system that has that integrated. It is rare that the towing capacity with or without weight distribution is the same, but this is case on some of these really high capacity...
view full answer... - Trailer Hitch Extension and Weight Distribution for 2015 Ford F350 With Truck Bed CamperIf your 2015 Ford F350 has the 2-1/2 inch hitch, you can use the Reese Titan # RP45292 Hitch Box Extension and Reducer. The extension is designed so that it can either be used in its 34 inch configuration or be cut down to 24 inches in length, which is perfect for your needs. When cut down to 24 inches, the extender has a 6000 lb towing capacity or if used with a weight distribution system, the capacity increases to 8000 lbs which would work well. If your truck has a 2 inch hitch, replacing...
view full answer... - Recommended Class V Trailer Hitch with 2-1/2 Inch Receiver for 2005 Ford F-350 Super Duty We have exactly what you need. For your 2005 Ford F-350 Super Duty, I recommend the Curt Class V Receiver Hitch # C15810. This Class V hitch is confirmed to fit your F-350 and will provide you with the 2-1/2 inch receiver opening that you are needing. It has a towing weight capacity of 20,000 pounds. Because the hitch is custom-fit for your truck, it will use existing holes in the vehicle's frame for a no-drill installation. I have attached the complete written installation instructions...
view full answer... - High Capacity Trailer Hitch Recommendation for 2008 Ford F-250 for Heavy Boat TrailerFor a trailer hitch with more towing capacity than you'd need the Curt hitch part # C15810 would be an excellent option. This hitch as towing capacities of 20,000 lbs which would work well for you. As long as you are sure you under the truck's capacity still this would allow you to tow your trailer. You should note that this is a 2-1/2 inch hitch so you may need a compatible ball mount like with part # C45456 which also has a 20k capacity. For a hitch ball you'd then want the part # 63840...
view full answer... - How Do Custom Rear Camper Tie Downs Mount to Aftermarket Trailer Hitch on 2002 Ford F-350Basically you will need to drill into the side plates of Curt hitch # C15810 to install TorkLift custom rear camper tie downs # TLR3500 on your 2002 Ford F-350. I have included a link to the installation instructions for the tie downs for you. I have also linked a video showing an example installation on a different vehicle that takes the same tie downs.
view full answer... - What Hitch Size Has Best Weight Capacities for 2002 Ford F-350The highest capacity hitches we offer for your 2002 Ford F-350 are 2-1/2 inch hitch sizes like the Curt # C15810 that has a 20,000 lb towing capacity. If you are looking for the strongest setup this would be the way to go for your truck. For an adjustable ball mount the highest capacity options fit the 2.5 inch size too like the part # 325-GH-1624 which has a 32k capacity.
view full answer... - Class V Hitch for 1999 Ford Super Duty With Ranch Hand Legend BumperThe only custom hitch we can confirm will fit your 1999 Ford Super Duty with the Ranch Hand Legend rear bumper is the Curt # C14355. This is a Class IV hitch instead of V with a 10,000 lb max gross trailer weight. It looks like even if you have the F-350 the max towing capacity for the vehicle is 10,200 lbs so this hitch should be adequate. If you're still set on a Class V we have the # C15810 but I can't confirm this is compatible since it hasn't been tested. The hitch mounts in the...
view full answer... - Will Curt Trailer Hitch Receiver # C15810 Fit Around OEM Spare on 2001 Ford F-250To install the Curt Trailer Hitch Receiver, part # C15810, on your 2001 Ford F-250, you will need to temporarily lower the spare tire. You will be able to re-install the spare tire after installation of the hitch. Yes, the hitch will fit with your OEM spare tire. I have linked instructions for the Curt Trailer Hitch Receiver, part # C15810 and an FAQ on trailer hitch installation tips.
view full answer... - Dimensions of Curt Trailer Hitch Receiver Part # C15810I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V # C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit select year Ford pickup trucks so may not be compatible with your 2002 FreightLiner. We do not currently offer any custom fit trailer hitches for your vehicle. Another option may be a Weld-On Class V Trailer Hitch like the Draw-Tite Ultra Frame...
view full answer...
- Trailer Hitch for a 2000 Ford F-250 that Allows the Spare Tire to Stay in PlaceCurt hitch # C15810 is a great Class V option for your 2000 Ford F-250. It will fit without having to relocate the spare as long as the spare tire is on a smaller than 20 inch wheel. This hitch has a 2-1/2 inch receiver. If you would rather have a 2 inch receiver use # C15410. Draw-Tite hitch # DT45508 is another option you could use (2-1/2 inch receiver). I have linked videos showing example installations of the Curt hitches for you.
view full answer... - Class V Trailer Hitch Receiver To Replace Curt Class III Receiver on a 1999 Ford F-250/F-350The 2" Curt Trailer Hitch Receiver # C15410 or 2-1/2" Curt Trailer Hitch Receiver # C15810 will be the closest to the same dimensions as your Curt Trailer Hitch Receiver # C13014 on your 1999 Ford F-250/F-350 Super Duty. These Class V receivers are going to use thicker steel and a larger cross tube to accommodate for the heavier weight ratings, but feature a nearly identical design. The 2" Curt Trailer Hitch Receiver # C15410 has a capacity of 2,550lbs tongue weight and 17,000lbs trailer...
view full answer... - Replacement Hardware for Curt Trailer Hitch # C15810We offer replacement hardware for our hitches like the Curt # C15810 with the part # RHK.
view full answer... - Hitch and Extension Recommendation for 2003 Ford F-350 for Allowing 32 inch Hitch ExtensionFor that length of extension we only have 2-1/2 inch hitch options as they are the only size that's going to have the strength for the stress extensions put on the hitch. You would need to upgrade your hitch to the 2-1/2 inch size with a hitch like the Curt part # C15810 and then go to an extension part # C45048.
view full answer... - Recommended Heavy Duty Trailer Hitch Receiver For 1999 Ford F-350 W/ 8" Deep Drop BumperWe have exactly what you are looking for! You are correct that the Curt Trailer Hitch Receiver # C15810 you were looking at will not fit your 1999 Ford F-350 with an 8" deep drop bumper. Instead I recommend the Curt # C15316 which measures 9" from the top of the mounting flange (Bottom of your trucks frame) to the top of the receiver so it will work with your bumper, and has a 2400lb tongue weight rating and 16000lb trailer weight rating, or a 2400lb tongue weight rating and 17000lb trailer...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Surface Scratches
Notes: surface scratches
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Andrew L
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Laura E.
7/10/2017
You are absolutely correct, Joshua. Spare tires larger than 20 inches will not be able to be stored in the original location underneath the vehicle.