How is Length of 7-Way Connector Lead Determined for Wiring Up Trailer
Question:
Is there a rule of thumb on what length to allow when cutting your Hopkins Wiring H20046, 8 foot 7 pin molded connector. Obviously one would hitch up the trailer , run it to both the female port of the tow vehicle and to the trailers female connector port. then turn like your would jackknife and get the maximum distance. Does it just sag between the 2 ports or do you run it along the tongue ball coupler for some support? Seems like just sagging would invite pop out from one of the ports.
asked by: David P
Helpful Expert Reply:
The method you described would be a great way to determine what length to cut the # H20046. That way you would end up with enough wire that it wouldn't come unplugged when making a tight turn. Securing the wire up and out of the way is a smart option as well so that the weight of the cable would not want to pull it out of the connector and so that it doesn't get caught on anything.
Product Page this Question was Asked From
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Shop: Lippert Replacement Controller for In-Wall Slide-Out - V-Sync II
- Shop: Gooseneck Hitch
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Search Results: 023~465
- Search Results: dexter axle
- Search Results: inverter
- Search Results: fmcm15~ss
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Search Results: convection microwave
- Search Results: 7 pin
- Search Results: 7 pin trailer wiring harness
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Shop: Trailer Wiring
- Shop: Brake Controller
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Video: Bargman Wiring - Trailer Connectors - 54006-057 Review
- Q&A: What Size Hole to Mount Optronics 6-1/2 Inch Oval Taillight # STL22CCRB
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Video: Kodiak Trailer Brakes BH-3MFS90FF-1-5 Review
- Video: HydraStar Marine Electric Over Hydraulic Actuator Installation
- Q&A: Determining the Correct Length for Safety Chains
- Video: Fulton Hi-Mount Spare Tire Carrier Review FHDSTC0101