Anti-Rattle Device for a Draw-Tite Class III Trailer Hitch and 2015 Nissan Murano

Question

Question:

Is an anti rattle device available for the draw tite for nissan platinum awd 2015 murano

asked by: Jim T

0

Expert Reply:

Yes, for the Draw-Tite trailer hitch # 75952 for your 2015 Nissan Murano you can use the Anti-Rattle Trailer Hitch Receiver Lock # 63232.

expert reply by: Michael H

0

Answer 1

Since manufacturers sometimes make small changes to the instructions we try to refrain from posting specifics for torque ratings on a page like this but I have linked the written instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver #75952…

view full answer...

Answer 2

There are numerous ball mounts that will fit your Class III trailer hitch and that have a 5 inch rise that you can use to tow the trailer level with your 2015 Nissan Murano. Ball mount #C45014 will not work because it does not fit a Class III hitch.…

view full answer...

Answer 3

Yes, you do need a slider, for turning clearance, to haul a 5th wheel trailer with your 2023 Chevy Silverado 3500. Since your truck has the GM factory puck system, I recommend the B&W Companion OEM 5th Wheel Hitch w/ Slider item #BWRVK3775. The…

view full answer...

Answer 4

For your 2023 GMC Sierra 2500 short bed with the OEM prep package I recommend the B&W Companion OEM 5th Wheel Hitch w/ Slider #BWRVK3775. The Companion features a 1" thick dual jaw which will give you a secure connection, preventing rattle…

view full answer...

Answer 5

Yes, you will be able to easily tow an 15,000 lbs Alliance Paradigm 310RL 5th wheel with your 2022 GMC Sierra 2500 standard bed. Unless it has a rotating pin box you will want to use a sliding hitch for the required clearance needed to back and turn…

view full answer...

Answer 6

The correct height setting is going to vary by trailer but you can get there taking some measurements. First make sure your trailer is on level ground and then measure from the ground up to the bottom of the king pin. Then on your truck take a…

view full answer...

Answer 7

The Optronics Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness #TL5RK will work seamlessly with the Light Guard - Unpainted Steel for 440 Tail Light #LG440NP you referenced. This guard is specifically made for these style…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...