What Size Grease Seal And Dust Cap is Needed on a 3,500 Lbs. Axle With L44649 Outer Bearing
Question:
If i have an L44649 outer bearing what size seal should I use? it is a 3500lb axle. also what size dust cap do i need?
asked by: Matt M
Expert Reply:
The size seal you will need will depend on the part number of your inner bearing.
If the outer bearing part number is L44649 and the inner bearing part number is also L44649, then you will use a TruRyde Seals, # RG06-020.
If the outer bearing part number is L44649 and the inner bearing part number is L68149, then it will be TruRyde Seals, # RG06-050.
The size grease cap you will need is 1.986 inches.
For the standard spindle you would use the TruRyde Grease Caps, # RG04-020.
If you have a E-Z Lube spindle, with a grease fitting in the end of the spindle, you would use the TruRyde Grease Caps, # RG04-040.
Products Referenced in This Question
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: weld on d rings
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load
- Search Results: trailer brake
- Search Results: trailer dust cap
- Search Results: break away system
- Search Results: dexter dust cap
- Search Results: lug nuts 1 2 20
- Search Results: 12 20 lug nuts
- Shop: Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Shop: Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies - 3,500 lbs
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review
- Video: Curt Trailer Hitch Receiver Installation - 2019 Jeep Cherokee
- Q&A: Replacement Boat Trailer Clearance Light with SAE P2 91 DOT on the Lens
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: My Trailer Hitch Doesn't Fit