Replacement Arm Assembly for Thule 591 Long Tray Classic Roof-mount Bike Rack

Question

Question:

Hi, I am looking for the replacement arm for a Thule 591 rook rack. Do you guys have it? Thank you.

asked by: Roy L

0

Expert Reply:

I checked with my contact at Thule for availability of a replacement arm assembly for your 591 Long Tray Classic roof-mount bike rack. Unfortunately they no longer offer this part.

I have linked you to our main page for roof-mount bike carriers where you can select your type of roof rack cross bars to see compatible carriers. You can also click on the filters on the page to select the type of rack and included features you prefer.

expert reply by: Adam R

0

Answer 1

The Replacement Wheel Tray #853-5423-56 for a Thule Big Mouth Roof Mounted Bike Carrier is 56" long. The interior of the tray is 2-1/4" at the widest point.

view full answer...

Answer 2

We still have parts for the Thule Roadway #TH912XTR. To secure your bike rack in your receiver, you will want the Thule Snug Tite Hitch Lock and Anti-Rattle Device #THSTL2 for a locking option or just the replacement pin #853-5917. For your…

view full answer...

Answer 3

The two parts you mentioned would be all you'd need, part numbers #753-3579 and #753-3583 as they appear to be the only parts that are damaged and the rest could be swapped over as needed.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this…

view full answer...

Answer 9

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...