Replacement Jack Recommendation for Boat Trailer with 5k Capacity
Question:
I need to replace this jack on my boat trailer. The teeth have started to break off of the gear. I would like to get a jack that will lift and hold a larger capacity. Currently this old jack is 2000lb lift. I really need one to lift at least 3000 lb and support 5000 lb, as my boat weighs 10,000 lbs out of the water. The trailer it self will support the bulk of the weight. My problem is the hole that the A-frame goes through is not big enough for some of the replacement jacks. Thank you
asked by: Mindy
Expert Reply:
The Bulldog Jack part # BD1700100317 is an A-frame jack with a 5k capacity that should work well for you. This jack has the standard outer diameter of 2-1/4 inches. You may need to enlarge yours if it wouldn't fit this jack. For a footplate you would want the part # BD018564.
Products Referenced in This Question
Replacement Square Footplate for Bulldog Round Trailer Jacks w/2" Diameter Tubes - 2" Tall
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Foot
- 2 Inch Diameter Tubing
- Bulldog
more information >
Bulldog Round, A-Frame Jack - Sidewind - 15" Lift - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Sidewind Jack
- 15 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Bulldog
more information >
Product Page this Question was Asked From
Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Continue Researching
- Search Results: trailer jack
- Shop: Brake Controller
- Shop: Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Shop: Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 3,000 lbs
- Shop: Bulldog Round, A-Frame Jack - Sidewind - 15" Lift - 5,000 lbs
- Video: Curt Ball Mounts - Fixed Ball Mount - C45014 Review
- Video: Curt Hitch Ball - Trailer Hitch Ball - C40018 Review
- Video: Bulldog Trailer Jack - A-Frame Jack - BD1700100317 Review
- Video: Draw-Tite Hitch Ball - Trailer Hitch Ball - TR63822 Review
- Video: Review of Draw-Tite Hitch Ball - Trailer Hitch Ball - 19258
- Video: Draw-Tite 2 Inch Long Shank Hitch Ball Review
- Video: Curt Ball Mounts - Fixed Ball Mount - C45015 Review
- Q&A: Will Curt Drawbar Clear Bumper On 2004 Chrysler Town And Country
- Q&A: Does The Curt Trailer Hitch Receiver # C98DR for 2023 Hyundai Ioniq 5 Reduce Ground Clearance?
- Q&A: Ball Mount For a 2013 Chevy Camaro with 1-1/4 Hitch
- Q&A: Distance From Pin Hole to Ball Mount Platform of Curt Ball Mount C45014
- Q&A: Ground Clearance on a 2020 Hyundai Sonata w/ the Draw-Tite DT74MR Hitch Receiver
- Q&A: Trailer Hitch Ball Recommendation for Curt Ball Mounts C45015 and C45014
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Shop: 2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-3/8" Long Shank - Chrome - 3,500 lbs
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer brake controller
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Search Results: brake controller