Is there a 6 Foot Long Boat Trailer Bunk Board Kit

Question

Question:

Do you have a 6ft Boat Trailer Bunk kit? also I need the extended Ubolts because my trailer frame is large? I only see this one below. CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60inch Long - 1 Pair Can you build a custom kit with the large Bunk Rails and larger u bolts? thank you,

asked by: George

0

Expert Reply:

What you can do is use bunk board kit # CE27600K75 and extra long u-bolts # CE11416 and obtain the wood locally to save a few bucks. We do not have a 6 foot kit. I pieced one together but it ended up being about twice the cost of using the kit and u-bolts recommended above.

expert reply by: Michael H

0

Answer 1

For bunk style guide-ons such as #CE27600 the bunk board and boat should only barely touch if at all. There isn't a hard and fast rule that says it should be this many inches. But since guide-ons are not meant to support weight like a regular…

view full answer...

Answer 2

The kit in question is #XLPROLUBE1980KIT. It fits 1.98 inch hubs (the opening where the grease cap fits in the hub) and 3500 pound axles. The seal which will replace the regular grease seal fits 1.72 inch spindles (diameter where the seal rides on…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 5

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Answer 6

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 7

The trailer hitches that fit a 2023 Ford Escape will not fit the Plug-In Hybrid version so we'll need to look into some alternative options so you can carry your extra cargo. If you just need to carry some bikes then I recommend getting the…

view full answer...

Answer 8

The overall size of the Furrion Over the Range RV Convection Microwave part#FMCM15SS is 29-15/16" wide x 16-3/8" tall x 15" deep and requires a 30" cutout. If this matches the opening and size of the model you have this will be a…

view full answer...

Answer 9

I looked up the dimensions of your High Pointe EC942K9E and it's 15 inches deep, 15.7 inches tall, and 29.9 inches wide so the Furrion Over the Range RV Convection Microwave #FMCM15SS would easily fit in place of it and would also work really…

view full answer...

Answer 10

Unless you want to completely clean out every bit of grease you will need to stick to a LMX red grease like item #L11390 that comes with the CE Smith Trailer Idler Hub Assembly item #CE13515. You can use your blue marine grease but you can't mix…

view full answer...

Answer 11

I believe you are referring to the XTRM Universal Sealant #34427034145-1. If so, it can absolutely be used in place of the original XTRM 100 that was on your roof. This will work just as well as the original sealant and its weather-resistant formula…

view full answer...

Answer 12

The etrailer Invisible Base Plate Kit #e86YR is compatible with compatible with all etrailer, Demco, and Blue Ox tow bars so you won't need an adapter to connect to your Aventa II tow bar.

view full answer...

Is there a 6 Foot Long Boat Trailer Bunk Board Kit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching