Fit Of Curt Class I Trailer Hitch on 2011 Volvo C70 Convertible

Question

Question:

Will this fit my 2010 Volvo C70? Curt Class I Receiver Hitch - 2011 Volvo C70 T5 Convertible Most Popular 2011 Volvo C70 Hitch Curt 2011 Volvo C70 Trailer Hitch

asked by: Jim T

0

Expert Reply:

The Curt Class I hitch you mentioned, part # C11065 is indeed a fit for your 2011 Volvo C70 with the T5 engine. I've confirmed this with Curt, just to be sure.

If you click the link I provided, you can see a video of this hitch being installed on a 2005 C70 like yours.

expert reply by: Mike L

0

Answer 1

We had the chance to install the Curt Hitch #C11065 on a 2012 C70 and we were able to determine that from top of the hitch opening to the ground it measured 9-1/2 inches. So if you subtract 2 inches for the distance from the top of the hitch…

view full answer...

Answer 2

I can help you pick out a bike rack that will be compatible with your Curt 1-1/4 Class I hitch #C11065 on your 2011 Volvo C70. The first thing we know is that from the center of your hitch pin hole to the edge of your bumper will need a rack with at…

view full answer...

Answer 3

For your 2012 Volvo C70 T5 convertible I recommend trailer hitch #C11065. The recommended ball mount is #C11031 and the pin and clip is #F-4. For a 1-7/8 inch ball use #19256 and for a 2 inch ball use #19258. The ball required should be stamped into…

view full answer...

Answer 4

First, the only trailer hitches that we have for the 2013 Volvo C70 will only fit the T5 convertible models. If it is another model then the hitch will not fit. Since you are only planning on using the hitch for a bike rack then you will not need a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...