Trailer Hitch Installation - 2012 Volvo C70 - Curt Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We had the chance to install the Curt Hitch #C11065 on a 2012 C70 and we were able to determine that from top of the hitch opening to the ground it measured 9-1/2 inches. So if you subtract 2 inches for the distance from the top of the hitch opening…

First, the only trailer hitches that we have for the 2013 Volvo C70 will only fit the T5 convertible models. If it is another model then the hitch will not fit. Since you are only planning on using the hitch for a bike rack then you will not need a…

The Curt Class I hitch you mentioned, part #C11065 is indeed a fit for your 2011 Volvo C70 with the T5 engine. I've confirmed this with Curt, just to be sure. If you click the link I provided, you can see a video of this hitch being installed on…

For your 2012 Volvo C70 T5 convertible I recommend trailer hitch #C11065. The recommended ball mount is #C11031 and the pin and clip is #F-4. For a 1-7/8 inch ball use #19256 and for a 2 inch ball use #19258. The ball required should be stamped into…

Yes, you can certainly mount the Thule ProRide XT Roof Bike Rack #TH598004 backwards with the bike facing the rear of your vehicle. This bike rack uses the same clamps and mounting hardware on the front and rear, so you won't have any issue…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…