Comparing Curt and Reese 2-1/2 Inch Trailer Hitches for a 2003 Ford F-250  

It sounds like your current 7-way is attached to the factory hitch of your 2014 Ford F-250 that you will be replacing with the Curt #C14355 and are looking for a way to relocate the 7-way. One solution would be the part #PK12711U that you…

Yes, it will. The B&W Hitch Receiver Reducer Sleeve item #BWRHXA2182 will work great with your 2022 Ford F-350's 2-1/2" receiver.

Using a Hitch Sleeve Reducer #BWRHXA2182 or #BWRHXA2183 will not reduce the capacity of your receiver. You will need to ensure you do exceed the weight capacity of the ball mount or other hitch mounted accessory that you are using. A sleeve like…

The towing capacity of your vehicle can and will be likely different than the towing capacity of a trailer hitch. The lowest rated component between the vehicle and trailer hitch will be your limiting factor. The Curt Trailer Hitch Receiver part…

Based on the amount of tongue weight your trailer has (1600+) the Reese Strait-Line weight distribution system, #RP66075, is one option. It is rated for 1,000 to 1,700 pounds tongue weight so as long as you stay within that range this system will…

Regardless of the capacity difference between using a WD system and not you would see a benefit to using a WD system for towing a trailer as heavy as yours. The lack of a capacity difference for the WD application does not indicate that you…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…