How Long Is a 3500-lb Axle for a 5 x 10-Foot Utility Trailer

Question

Question:

How long is the axle for a 5x10 utility trailer 3,500 lb

asked by: Charles

0

Expert Reply:

All of the 3500-lb-rated trailer axles that we offer are 89-inches in length from hub face to hub face and have spring seats at a 74-inch spacing. Your 3500-lb axle may be different so you'll want to measure your hub face and spring seat dimensions. All such axles are shown on the link provided for you. We offer kits with hubs or without, with electric brakes or without and even axle-less suspensions like the Timbren # ASR3500S04. The unique suspension systems do not require an axle beam and so they offer reduced weight and better ground clearance. These are suitable for single- and tandem-axle applications.

If you want, for example, a standard beam axle with 5-on-4-1/2-inch idler hubs we offer Dexter kit # 35545I-EZ-89. An install video is linked for you.

Axle # T3584F-EZ-8974 measures 93-3/4-inchs tip to tip.

expert reply by: Adam R

0

Answer 1

Unfortunately, we do not have any hubs that match the dimensions you provided. The only other option I have for you at this time would be to replace the axle. If you can provide me with the hub face to hub face and spring center to spring center…

view full answer...

Answer 2

The bearing that you have on the trailer hub measures just under 1 inch (0.985) and we are not going to have a hub that accepts a bearing with an inner diameter of that size. This is common for the trailer kits like the Haul Master branded trailers.…

view full answer...

Answer 3

The 30205 bearing that you referenced has an inner diameter of just under 1 inch (0.985 to be exact). We do not have this particular bearing or a hub that uses this size bearing available. The #L44643 bearing that you also mentioned has an inner…

view full answer...

Answer 4

We offer a range of leaf springs, both double-eye and slipper types, in several lengths near your 26-inch measurement. I have linked you to our main page for trailer springs. When you click on the product link you will see all 4 leaf springs near 26…

view full answer...

Answer 5

The manufacturer of #e27SR is Universal Group and the arch measures 4-1/4 inches high. I've attached a photo for you to see.

view full answer...

Answer 6

I would be happy to help you determine the correct replacement leaf springs for your 2016 Grand Design Reflection 29RS with tandem Lippert 4400lb axles, but unfortunately the axle tags like the one shown in your picture do not have leaf spring…

view full answer...

Answer 7

If your eye diameter is 9/16 of an inch, then I recommend the Redline #e27SR leaf spring. I would double check the other measurements listed for this spring to ensure fit on your trailer, but this will work for your higher axle capacity and…

view full answer...

Answer 8

With trailer leaf spring replacement you want to go with at least the same weight capacity as the axle with going a little bit over being acceptable. Next you'll want to match the length as best as possible while keeping in mind that leaf springs…

view full answer...

Answer 9

The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e28SR, but if you have the 26 inch springs, you will want the 6-Leaf…

view full answer...

Answer 10

The best matching leaf springs we offer for a 4,400 lb axle is going to be the #e27SR which is for 4,500 lb axles and has the very common spring length of 26 inches.

view full answer...

Answer 11

The only real difference between the Timbren Heavy-Duty Axle-Less Trailer Suspension with 4" Lift Spindle - 3,500 #ASR35HDS05 and the standard Timbren #ASR3500S06 is that the Heavy-Duty model features a larger spindle that would accommodate…

view full answer...