Dexter Trailer Idler Axle w/ EZ Lube Hubs Installation Video

You can mount trailer axles above or below the leaf springs. The difference is just the amount of ground clearance that the trailer would end up having. The biggest advantage with the spring below the axle (trailer will be lower) is that you would…

I attached a picture that shows the proper position of shackles and equalizers on trailer suspension. Sometimes the shackle will flip up but if you jack up the trailer by the axle that's got the shackle flipped you can usually get it to…

Yes, we do have videos showing installation of hubs. I have included a link to one for you. I have also linked a video showing installation of a hub and drum assembly. Between these two videos you should be able to install some hubs with no…

There actually is not a specific torque rating for shackle bolts like the Redline #166081 that you referenced. You just want to make sure that the bolt is long enough so that when installed you have at least 2 threads protruding from the nut. This…

The torque requirements for leaf spring u-bolts depend on the diameter of the u-bolts that are being used. If the gross weight of your tandem axle trailer is 7,000 lbs, then you likely have two 3,500 lb axles. Typically 1/2 inch diameter u-bolts…

Based on your description it sounds like you have the Rubber Bushing with Steel Sleeve #DX77XR. This is the closest in size to that design. The measurements are very similar to what you gave me with an inner diameter of 5/8", outer diameter…

For trailer axle u-bolts like the part #APUBR-10 the torque rating to use is between 45 and 75 ft lbs.

What I recommend you do is use the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY84FR in conjunction with the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers #D210. This dual adapter will…

I can help you pick out a hub for your trailer. Thank you for giving me the bearing, spindle, and bolt pattern information. That is exactly what I need to find the right hub. For a hub that will fit your spindle that comes with the bearings already…

I've contacted Karavan, and they could tell me that you have a 2200 lb axle, but they unfortunately couldn't tell me anything about a replacement axle. In order to determine if any of our stock axles would work for you, I'd…

As long as your Ironton 5' x 8' trailer uses the common 5 on 4-1/2" bolt pattern you can absolutely upgrade to the Kenda Karrier S-Trail #AM31199DX. This tire combination is rated for 1220lbs each and 81 MPH, and with it…

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…